Canon pixma mp180 User Manual

Page of 128
82
Chapter 9
Routine Maintenance
„
Cleaning The Roller
Clean the paper feed rollers if paper is not fed properly. Cleaning the paper feed rollers will wear 
the rollers, so perform this only when necessary.
1
Press [ON/OFF] to turn ON the machine, then remove any paper from the Auto 
Sheet Feeder.
2
Press [Menu] repeatedly until <MAINTENANCE> appears.
3
Use [
] or [
] to select <ROLLER CLEANING>.
4
Press [OK].
5
Repeat steps 2 to 4 twice.
6
Open the Paper Output Tray.
7
Load three or more of A4- or Letter-sized paper in the Auto Sheet Feeder.
8
Repeat steps 2 to 4 three times.
The sheet of paper is automatically fed in and then out of the machine.
1
Press [ON/OFF] to turn ON the machine, then remove any paper from the Auto 
Sheet Feeder.
2
Press [Maintenance] repeatedly until <b> appears.
3
Press [Black] or [Color].
4
Repeat steps 2 to 3 twice.
5
Open the Paper Output Tray.
6
Load three or more of A4- or Letter-sized paper in the Auto Sheet Feeder.
7
Repeat steps 2 to 3 three times.
The sheet of paper is automatically fed in and then out of the machine.
Note
If there are no signs of improvement after performing three times, contact a 
Canon service representative.
downloadlike
ArtboardArtboardArtboard
Report Bug