Canon pixma mp180 User Manual

Page of 128
Chapter 10 
87
Troubleshooting
<E> and <error code> are alternately displayed on the LED of MP160.
CHECK INK
U140
The FINE Cartridge may not be the compatible with this machine. Install 
the appropriate FINE Cartridge. If lines are misaligned or the resulting 
output is not satisfactory, carry out the FINE Cartridge Alignment.
CHECK PRINTER
An error requiring servicing might have occurred. Turn OFF the machine, 
and unplug the power cord of the machine from the power supply. After a 
while, plug the power cord of the machine back in and turn ON the 
machine. If the same error occurs, contact a Canon service representative.
Note
If the ON/OFF Lamp (green) and Alarm Lamp (orange) flash alternately, 
disconnect the USB cable from the machine, and then turn the machine OFF 
and then unplug the machine from the power supply for a while. Plug the 
machine back in and turn the machine back ON.
If the problem remains, contact a Canon service representative.
Message
Action
E, 2
Reload the paper correctly and press [Black] or [Color].
E, 3
If paper has jammed in the machine, clear the jam, reload the paper in the 
machine correctly and then press [Black] or [Color].
E, 4
The ink may have run out. Replace the FINE Cartridge, and close the 
Scanning Unit. If lines are misaligned or the resulting output is not 
satisfactory, carry out the FINE Cartridge Alignment. If printing is in 
progress and you want to continue printing, press [Black] or [Color]. Then 
printing can continue under the ink out condition with the FINE Cartridge 
installed. Replace the empty FINE Cartridge immediately after the printing. 
The resulting print quality is not satisfactory, if printing is continued under 
the ink out condition.
E, 5
The FINE Cartridge may not be installed properly, or the Cartridge may not 
be the compatible with this machine. Install the appropriate FINE 
Cartridge. If lines are misaligned or the resulting output is not satisfactory, 
carry out the FINE Cartridge Alignment.
E, 7
Some FINE Cartridges are not installed in place. Install the FINE 
Cartridges in the appropriate positions.
E, 8
Ink absorber is almost full. Ink used for cleaning is absorbed in a ink 
absorber placed in the machine. <E, 8> indicates that the ink absorber is 
nearly full. Press [Black] or [Color] to cancel the error so that you can 
continue printing. If this error occurs, replacement of the ink absorber and 
maintenance of the machine are required. Canon recommends to contact 
a Canon service representative as soon as possible. Once the ink 
absorber becomes completely full, printing cannot be done until the ink 
absorber is replaced.
E, 9
Depending on the model or brand of your device, you may have to select a 
print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually 
after connecting the device to the machine. Perform necessary operations 
according to the instruction manual supplied with your device.
If the error is still unresolved, there is a possibility that you are using a 
digital camera or digital video camcorder that is not supported by this 
machine. Use a digital camera or digital video camcorder compatible with 
this machine.
Message
Action