Canon pixma ip4300 User Manual

Page of 102
33
Routine Maintenance
5
Install the ink tank.
(1) Insert the front end of the ink tank into the Print 
Head.
(2) Press on the 
 mark on the ink tank until 
the ink tank snaps firmly into place.
(3) Make sure that the ink lamp lights up red.
6
Close the Inner Cover.
7
Close the Top Cover.
Important
The printer cannot be used unless all the ink tanks are 
installed.
Note
Make sure that the Inner Cover is closed. Printing will 
not start with the Inner Cover open since paper can not 
be fed properly.
Note
z
If the ALARM lamp still flashes orange after the Top Cover is closed, see “ALARM Lamp 
Flashes Orange” on page 76.
z
When you start printing after replacing the ink tank, Print Head Cleaning is performed 
automatically. Do not perform any other operations until Print Head Cleaning finishes. The 
POWER lamp flashes green during cleaning.
(1)
(2)
(3)
*1
*1 Make sure the position of the 
tank matches the label.
downloadlike
ArtboardArtboardArtboard
Report Bug