Canon pixma mp170
Chapter 7
63
Printing Photographs Directly From A Digital Camera
z
About “Layout” and “Trimming”
For “Layout”, when the “Default setting” (selections based on the machine setting) is
selected, the machine operates based on the bordered/borderless setting specified in the
Memory card mode of the machine (MP170) or the Fit-to-Page setting when Photo Paper
is selected on the Operation Panel of the machine (MP150). Trimming is performed based
on settings on the PictBridge-compliant device.
selected, the machine operates based on the bordered/borderless setting specified in the
Memory card mode of the machine (MP170) or the Fit-to-Page setting when Photo Paper
is selected on the Operation Panel of the machine (MP150). Trimming is performed based
on settings on the PictBridge-compliant device.
z
About “Image optimize”
When “Default setting” (selections based on the machine setting) is selected, the machine
operates based on the “IMAGE ENHANCEMENT” settings mode using the controls of the
machine.
If you use a Canon PictBridge-compliant device, you can select “VIVID”, “NR”, “VIVID+NR”
or “FACE”.
(Note that these options cannot be selected for some models.)
operates based on the “IMAGE ENHANCEMENT” settings mode using the controls of the
machine.
If you use a Canon PictBridge-compliant device, you can select “VIVID”, “NR”, “VIVID+NR”
or “FACE”.
(Note that these options cannot be selected for some models.)
z
About “Date/File No. print”
By default, “Off” is selected for this machine.
If you select an image which has had the shooting date embedded in it using a camera with
the print mode, select “Off” for this function. If you select “Date”, “File No.”, or “Both”, the
date and/or file number will be printed over the embedded date (MP170).
If you select an image which has had the shooting date embedded in it using a camera with
the print mode, select “Off” for this function. If you select “Date”, “File No.”, or “Both”, the
date and/or file number will be printed over the embedded date (MP170).
Note
z
When printing onto Photo Stickers (PS-101) (16-up), use the following
settings.
settings.
1. Load Photo Stickers (PS-101) in the Auto Sheet Feeder.
2. Select “10 x 15 cm / 4" x 6"” for the “Page size”, and “Photo” for the
2. Select “10 x 15 cm / 4" x 6"” for the “Page size”, and “Photo” for the
“Media type”.
3. Select “N-up” for layout, then select “16”.
z
Some PictBridge compliant devices display the Layout option; 2-up, 4-
up, 9-up, and 16-up. In this case always select “16-up”. If there are no
options on the PictBridge compliant device that correspond to 2-up, 4-
up, 9-up, or 16-up, printing on stickers is not possible.
up, 9-up, and 16-up. In this case always select “16-up”. If there are no
options on the PictBridge compliant device that correspond to 2-up, 4-
up, 9-up, or 16-up, printing on stickers is not possible.
z
When you are using Photo Stickers (PS-101), do not set “Borderless
Printing” in “Layout” settings.
Printing” in “Layout” settings.
Note
z
When “VIVID” is selected, the green and blue portions of photos are
printed more vividly.
printed more vividly.
z
When “NR” (Noise Reduction) is selected, noise in blue portions, such
as the sky, and dark portions is removed.
as the sky, and dark portions is removed.
z
When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are
performed.
performed.
z
When “FACE” is selected, a darkened face on the photo taken against
the light is brightened.
the light is brightened.
Note
z
Never disconnect the USB cable during printing.
z
When disconnecting the USB cable between the device and machine,
follow the instructions given in the instruction manual of the device.
follow the instructions given in the instruction manual of the device.
z
Controls of the device cannot be used for the following:
– Print quality setting
– Machine maintenance
– Print quality setting
– Machine maintenance
z
For the device operation method and troubleshooting, refer to your
digital device’s manual.
digital device’s manual.