Canon pixma mp170
72
Chapter 9
Routine Maintenance
Knowing When To Replace A FINE Cartridge
It is important to identify the empty Cartridge using the LCD/LED and replace it.
<BLACK INK LOW> or <COLOR INK LOW> appears on the LCD (MP170) / <E> and <4>
appear alternately on the LED (MP150) when ink becomes empty during printing.
Printing will resume as soon as the FINE Cartridge is replaced and the Scanning Unit is closed.
z
appear alternately on the LED (MP150) when ink becomes empty during printing.
Printing will resume as soon as the FINE Cartridge is replaced and the Scanning Unit is closed.
z
Press [Stop/Reset] to cancel the current print job.
z
Press [OK] (MP170) / [Black] or [Color] (MP150) to resume printing with an empty FINE
Cartridge. When printing is finished, replace the FINE Cartridge immediately. If you continue
printing with an empty FINE Cartridge, it will be a cause of trouble.
Cartridge. When printing is finished, replace the FINE Cartridge immediately. If you continue
printing with an empty FINE Cartridge, it will be a cause of trouble.
* Be sure to press [OK] (MP170) / [Black] or [Color] (MP150) with all the FINE Cartridges
installed. Printing does not resume if any of the FINE Cartridges are left uninstalled.
* If you continue to print with an empty FINE Cartridge, the ink level will not be detected
correctly.
z
With MP170, you can check the current ink level by pressing [COPY], [SCAN] or [MEMORY
CARD]. The LCD will display the ink level for a few seconds.
CARD]. The LCD will display the ink level for a few seconds.
(1) Indicates the remaining ink volume at four different levels.
z
If an error message is displayed on the LCD/LED, a FINE Cartridge error has occurred and
the machine cannot continue to print. See “An Error Message Is Displayed On The LCD/LED”
on page 87.
the machine cannot continue to print. See “An Error Message Is Displayed On The LCD/LED”
on page 87.
Note
Should missing characters or white streaks appear despite sufficient ink
levels, see “When Printing Becomes Faint Or Color Is Incorrect” on
page 76.
levels, see “When Printing Becomes Faint Or Color Is Incorrect” on
page 76.
Ex:
COPY MODE
BLK
COL
(1)