Canon pixma mp950 Manual
Install the software.
Select Easy Install in order to install the application software, On-screen Manual and MP drivers. Select Custom Install in order to choose the options you would like to install.
This sheet explains Easy Install Only.
This sheet explains Easy Install Only.
IMPORTANT
Temporarily close any open applications, including anti-virus software. Computer security programs can be re-started after software installation.
• A printer cable is not included. You must purchase a USB cable (less than 10 ft./3 m) to connect your
machine to a computer.
The following software programs are included on the Setup CD-ROM:
IMPORTANT
• Do not connect the USB cable until Step 3, “Connect the USB cable.”
• You must log on as an administrator or have administrative privileges in order to install the software
• You must log on as an administrator or have administrative privileges in order to install the software
in Windows
®
XP or Windows 2000.
• If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall
this version before installing the new version. For instructions on uninstallation, see the guides for
that version of MultiPASS Suite.
that version of MultiPASS Suite.
Step 1: Prepare the Setup CD-ROM and get ready to install.
1
Turn off the machine.
1. Press the [ON/OFF].
2. Be sure [COPY] stops flashing and all the lamps on the Operation Panel are off.
2
Turn ON your computer, and start Windows.
3
Insert the Setup CD-ROM into the CD-ROM drive.
• The setup program should run automatically. If the installer in the CD-ROM does not run
automatically, click [Start] and select [My Computer], then double-click the CD-ROM icon.
IMPORTANT
If the following screen appears, the USB cable is connected.
z Perform the following steps.
1. Press [ON/OFF] to turn off the machine.
2. Disconnect the USB cable.
3. Click [Cancel].
Step 2: Install the software.
1
Click [Easy Install], then click [Install].
• To read descriptions of the software programs, set the mouse on the item.
Step 3: Connect the USB cable.
1
When the [Printer Connection] appears, connect the machine to the computer
with the USB cable.
with the USB cable.
2
Turn on the machine.
• In Windows 2000, the machine may not be set as the default printer.
3
Click [Exit].
If prompted to, restart your computer.
You now have completed installation of the software.
The following software programs are included on the Setup CD-ROM:
IMPORTANT
Do not connect the machine to Mac
®
OS 9 or Mac OS X Classic environments since they are not
supported.
Step 1: Connect the USB cable.
• Make sure the machine is turned ON.
Step 2: Prepare the Setup CD-ROM.
1
Turn ON your computer, and start Mac OS X.
2
Insert the Setup CD-ROM into the CD-ROM drive.
• The setup program should automatically run. If the setup program does not automatically run, double-
click [Setup] on the Setup CD-ROM, or click [Setup] on the Setup CD-ROM and click [File] menu and
then select [Open].
then select [Open].
Step 3: Enter the name and password for an Administrator
Account.
1
Enter the name for Administrator.
2
Enter the password and then click [OK].
Step 4: Install the software.
1
Click [Easy Install], then click [Install].
• To read descriptions of the software programs, set the mouse on the item.
2
Click [Restart] to restart your computer.
* When connecting from Mac OS X v.10.3.3 or earlier:
Restarting the computer while connected to the machine may cause the machine not to be detected. To
resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back
ON again.
resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back
ON again.
z Perform the following to make sure the driver has been installed correctly.
1. Select [Applications] from the [Go] menu.
2. Double-click the [Utilities] folder, then the [Printer Setup Utility] ([Print Center] when using
Mac OS X v.10.2.x) icon.
If the printer is displayed in the [Printer List], the printer driver is installed.
If the printer is not displayed in the [Printer List], click [Add] in the [Printer List] and select
[USB] from the pop-up menu. Select [MP950] from the [Product] list and click [Add].
If the printer is displayed in the [Printer List], the printer driver is installed.
If the printer is not displayed in the [Printer List], click [Add] in the [Printer List] and select
[USB] from the pop-up menu. Select [MP950] from the [Product] list and click [Add].
You now have completed installation of the software.
MP Drivers
On-screen Manual
MP Navigator
Easy-WebPrint
Easy-PhotoPrint
ArcSoft PhotoStudio
ScanSoft OmniPage SE
Click
Click
Click
Click
US Only
When the Registration Screen appears,
follow on screen instructions to register
your product. You will need you product
serial number, which is located on the
inside of the machine. Refer to “2 Install
the Print Head.”
follow on screen instructions to register
your product. You will need you product
serial number, which is located on the
inside of the machine. Refer to “2 Install
the Print Head.”
MP Drivers
On-screen Manual
MP Navigator
Easy-PhotoPrint
ArcSoft PhotoStudio
ScanSoft OmniPage SE
Enter
Click
Click
Click
Click
US Only
When the Registration Screen appears,
follow on screen instructions to register
your product. You will need you product
serial number, which is located on the
inside of the machine. Refer to “2 Install
the Print Head.”
follow on screen instructions to register
your product. You will need you product
serial number, which is located on the
inside of the machine. Refer to “2 Install
the Print Head.”
Cassette Loading
You can load paper in both the Auto Sheet Feeder and Cassette.
1
Prepare to load paper.
2
Load the paper, then slide the Paper Guides to fit the loaded paper stack.
(1) Pull out the Cassette from
the machine.
(2) Remove the Cover on
the Cassette.
AB
Load the paper into the
Cassette with the print side
facing DOWN.