Canon pixma mp600 Quick Setup Guide

Page of 112
68
Troubleshooting
If an Error Occurs When the Machine Is Connected to a Computer
When an error occurs in printing such as the machine is out of paper or paper is jammed, a 
troubleshooting message is displayed automatically. Take the appropriate action described in the 
message.
The message may vary depending on the version of your Windows operating system.
Error Message Is Displayed on the LCD
If an error message is displayed on the LCD, take the corresponding action described below.
Message
Action
“There are no photos in the memory 
card.”
z
There are no image data stored on the memory card that can be read by this 
machine.
z
The machine may not recognize the file if the file name or the folder path 
contains certain characters. Use only alphanumeric characters.
z
Photo data edited or processed on a computer must be printed from the 
computer.
“The following ink may have run out. 
Replacing the ink tank is 
recommended.”
U041
If the lamp on the ink tank is flashing, ink may have run out.
Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, press the OK button 
with the ink tank installed. Then printing can continue. Replacing the ink tank is 
recommended after the printing. The machine may be damaged if printing is 
continued under the ink out condition. See “Replacing an Ink Tank” on page 46.
Note
If multiple ink lamps are flashing red, check how fast they are flashing. Fast 
flashing (at about 1-second intervals) indicates the tank is empty. Slow flashing 
(at about 3-second intervals) indicates ink is low. For details on different flashing 
speeds, see “Getting the Ink Level Information” on page 46.
“The following ink has run out. Replace 
the ink tank.”
U163
Ink has run out. (The lamp on the ink tank flashes.)
Replace the ink tank and close the Scanning Unit (Printer Cover).
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to release the function 
for detecting the remaining ink level. Press and hold the Stop/Reset button for 
at least 5 seconds, and then release it.
* With this operation, releasing the function for detecting the remaining ink 
level is memorized. Please be advised that Canon shall not be liable for any 
malfunction or trouble which may be caused by continuation of printing under 
the ink out condition. 
See “Replacing an Ink Tank” on page 46.
downloadlike
ArtboardArtboardArtboard
Report Bug