Canon SX20 User Manual

48

PROJECTING AN IMAGE FROM A

V

 EQUIPMENT

The image adjustment method is the same as that used when the projector is connected
to a computer. Lets take a look at only the topics specific to AV equipment.
For other image adjustment methods, see P30.

You can select one of three screen modes depending on your AV equipment,
specifications of playback software, etc.
• A screen mode can be selected by selecting “Screen settings” from the menu. (58)

• The upper, lower, left, and/or right portions of a projected image may be missing

depending on the selected display mode

• When DIGITAL RGB or ANALOG RGB-1 is selected as the input signal type, the

display mode is the same as that used when the projector is connected to the
computer. (P33)

4:3

16:9

J Normal (VIDEO, S-VIDEO and COM-

Select this if you want to project an image
at a 4:3 aspect ratio (W:H).

J Wide Screen (VIDEO, S-VIDEO and

Select this if you want to project an image
at a 16:9 aspect ratio (W:H).

For wide screen sizes, see the
table on 85.

J Auto (COMPONENT input only)
To switch between [Normal] and [Wide
Screen] automatically depending on the
image from the AV equipment, select
[Auto].