Nikon COOLPIX 4500 Maintenance Manual
VAA11901-R.3579.A
- A13 ･ E4500 -
12. Color Adjustment
[Note]
AWB adjustment should always be carried out first.
[Adjustment condition]
• Set the color adjustment chart to the color viewer.
(Do not enter any light.)
• Set the color adjustment chart so that it becomes center of the screen.
(Do not enter any light.)
• Set the color adjustment chart so that it becomes center of the screen.
[Adjustment method]
• Double-click on the DscCalDi128.
• Click the UV Matrix, and click the Yes.
• Color adjustment values will appear on the screen.
CHECK=0±2, 0±2, 0±2, 0±2
• Click the OK.
• Click the UV Matrix, and click the Yes.
• Color adjustment values will appear on the screen.
CHECK=0±2, 0±2, 0±2, 0±2
• Click the OK.
“Yes”
Adjustment
value
13. CCD White point Defect Detect Adjustment
[Adjustment method]
• Double-click on the DscCalDi128.
• Select the CCD Defect from Test menu of Calibration Soft and click the OK. Refer to FIG-1.
• After adjustment, An adjustment value will appear on the screen. Refer to FIG-2.
• Select the CCD Defect from Test menu of Calibration Soft and click the OK. Refer to FIG-1.
• After adjustment, An adjustment value will appear on the screen. Refer to FIG-2.