Nikon COOLPIX 4500 Maintenance Manual

Page of 65
VAA11901-R.3579.A
- A14 ・ E4500 -
<FIG-2>
15.  USB STORAGE INFORMATION REGISTRATION
USB storage data is important for when the camera is connected to a computer via a USB connection.
If there are any errors in the USB storage data, or if it has not been saved, the USB specification
conditions will not be satisfied, so always check and save the USB storage data.
[Adjustment method]
1.  Connect the camera to a computer. (Refer to 8. Connecting the camera to the computer on  the page  A10.)
2. Double-click on the DscCalDi128.
3. Click on the Get button in the USB storage window and check the USB storage data.
     VID: NIKON
     PID: NIKON DSC E4500
     Serial:
     Rev. : 1.00
4. Check the “Serial” in the above USB storage data. If the displayed value is different from the serial number 
printed on the base of the camera, enter the number on the base of the camera.
   Then click the Set button.
5. Next, check VID and Rev. entries in the USB storage data. If any of them are different from
the values in 3. above, make the changes and then click the corresponding Set button.
14.  CCD Black point Defect Detect Adjustment
 [Adjustment method]
•  When setting the camera in place, sei it to an angle so that nothing appears in any part of the color viewer 
except the white section. (Do not enter any light.)
•  Double-click on the DscCalDi128.
•  Select  CCD Black on the LCD Test, and click the 
   Yes. Refer to FIG-1.
•  After the adjustment is completed, the number of 
   defect will appear, Refer to FIG-3.
<FIG-3>
<FIG-1>