Nikon COOLPIX 4500 Maintenance Manual
VAA11901-R.3579.A
- R3 ･ E4500 -
Item
Criteria
Applied tool(s)
AF
Distance measure-
ment impossible dis-
play
ment impossible dis-
play
Shortest photography
distance
Normal
distance
Normal
Macro
• When the shutter release button is lightly pressed, the LED “
8Hz” must blink.
(While distance measurement is possible, lightly press the
shutter release button and check it.)
(While distance measurement is possible, lightly press the
shutter release button and check it.)
The focus of AF must be fit at the following distance.
• 340mm (in the whole zoom area except Wide-end position)
• 550mm (only at Wide-end position)
• 550mm (only at Wide-end position)
(Check at each zoom position.)
• Within 24mm from the protection glass surface
(Set to the "Macro" mode.)
(Check at each zoom position in the range where the "Macro"
mode display (tulip) color is changed into yellow.)
Visual observation
Tape measure
Shooting with a speed
light
light
Light adjustment
accuracy
accuracy
Guide No. FULL
(ISO100•m)
(ISO100•m)
Recycling time
Lock under uncharged
condition
condition
• Tele-end: 0.7~1.6m
• Wide-end: 0.7~3.0m
In the above range, ± 1Ev or less
• Wide-end: 0.7~3.0m
In the above range, ± 1Ev or less
(ISO: AUTO • Speed light: Compelling flash • Exposure: P
mode)
mode)
• 6.0 + 0.35/-0.4 EV
(Charge for 18 seconds with the new battery and perform
measurement within 1 second.)
measurement within 1 second.)
• Within 6 seconds
(When the full-charged battery mark is displayed)
• While the shutter release button is lightly pressed, the red
LED blinks and “release” cannot be accepted.
(While the camera is under speed light pop-up condition
and uncharged condition in the flash mode, press the release
button.)
(While the camera is under speed light pop-up condition
and uncharged condition in the flash mode, press the release
button.)
Standard reflection
plate
plate
Flash meter
New battery
New battery
Visual observation
Wrong flash
Speed light pop-up
operation
operation
• Wrong flash must not occur.
(Check by loading/unloading a battery, giving a light shock
and operating mode buttons except S2.)
and operating mode buttons except S2.)
• When stored or during storing action, the speed light shall not
have an outstanding "caught-in-mechanism" touch, "rubbed-
in-mechanism" touch, play, etc.
in-mechanism" touch, play, etc.
• Latch must be accurately effective.
• When luminance is low, pop-up operation must be done by
• When luminance is low, pop-up operation must be done by
lightly pressing the shutter release button.
(Push the speed light in each direction and check it.)
(Push the speed light in each direction and check it.)
New primary
battery
battery
Visual observation