Nikon FAA350NA User Manual
• Push and hold the lens release button Å, then turn the lens clockwise Í.
19
18
BASIC OPERA
TION
Mount Lens
2
2.
2
2.
3
2.
4
Use D- or G-type AF Nikkor lens to utilize all the functions of this
camera. (See page 32 for Lens Compatibility.)
Make sure to turn the power switch off when attaching/detaching the
lens.
When attaching the lens, take care not to press the lens release button.
Avoid direct sunlight when attaching/detaching the lens.
camera. (See page 32 for Lens Compatibility.)
Make sure to turn the power switch off when attaching/detaching the
lens.
When attaching the lens, take care not to press the lens release button.
Avoid direct sunlight when attaching/detaching the lens.
Check points
Turn the power switch off and
mount the lens to the camera
body.
mount the lens to the camera
body.
Turn the power switch off and mount the lens to the
camera body.
camera body.
• Position lens in the camera’s bayonet mount so that the mounting
indexes on lens and camera body are aligned, then twist lens
counterclockwise until it locks into place. (Be sure not to touch the lens
release button.)
counterclockwise until it locks into place. (Be sure not to touch the lens
release button.)
• When the lens is not attached or when a non-CPU lens (page 32) is
attached and the power switch is turned on, ƒ-- appears in the LCD
panel and viewfinder. (Exposure mode indication ¡ or ™ also blinks in
Programmed Auto or Shutter-Priority Auto exposure mode. Page 46/48.)
panel and viewfinder. (Exposure mode indication ¡ or ™ also blinks in
Programmed Auto or Shutter-Priority Auto exposure mode. Page 46/48.)
Detaching the lens.
22
ft
m
28
7
0
50
35
28
8
5
1
0
5
22
When camera is left unattended without lens
When you leave the camera unattended
without a lens attached, be sure to attach
the supplied body cap (page 3), or optional
body cap BF-1A. (BF-1 body cap cannot be
used.)
without a lens attached, be sure to attach
the supplied body cap (page 3), or optional
body cap BF-1A. (BF-1 body cap cannot be
used.)
• When CPU Nikkor lens other than G-type is not set to its minimum aperture setting and
the power switch is turned on, ƒEE blinks in the LCD panel and viewfinder and the
shutter cannot be released.
shutter cannot be released.
• With CPU Nikkor lens other than G-type, lock the lens aperture (except in case setting the
aperture with the lens aperture ring) (page 75).
• The G-type Nikkor lens has no aperture ring; aperture should be selected from camera
body. Unlike other CPU Nikkor lens, aperture does not need to be set to minimum.
With CPU Nikkor lens with aperture ring (other than G-
type), set the lens aperture to its minimum and lock.
type), set the lens aperture to its minimum and lock.
2.
1
Check the lens type.
Å
CPU Nikkor lens other than G-type (Illustration is D-type Nikkor lens),
with aperture ring
with aperture ring
Í
G-type Nikkor lens, without aperture ring
CPU contacts of CPU
lens
Å CPU Nikkor lens
other than G-type
Í G-type Nikkor lens
P500 (E) 02.12.27 5:48 PM Page 18
WWW.LENSINC.NET