Nikon FAA350NA User Manual
29
28
Confirm Indications in Viewfinder and Release Shutter
7
7.
1
7.
2
7.
3
Focus, shutter speed and aperture can be confirmed in the
viewfinder. If any other warning indications appear, see page 46.
When you reach the end of the film roll, End blinks in the LCD panel.
Press the two film rewind buttons „ simultaneously to rewind film.
For mid-roll rewind, see page 34.
For self-timer operation, see page 67.
For remote control operation, see page 94.
viewfinder. If any other warning indications appear, see page 46.
When you reach the end of the film roll, End blinks in the LCD panel.
Press the two film rewind buttons „ simultaneously to rewind film.
For mid-roll rewind, see page 34.
For self-timer operation, see page 67.
For remote control operation, see page 94.
Check points
BASIC OPERA
TION
Confirm that / (in-focus
indicator) appears in the
viewfinder, then slowly, fully
depress the shutter release
button. Camera automatically
tracks subject that has been
moving.
indicator) appears in the
viewfinder, then slowly, fully
depress the shutter release
button. Camera automatically
tracks subject that has been
moving.
Confirm that focus indicator / appears and slowly
depress the shutter release button.
depress the shutter release button.
Confirm indications in the viewfinder while lightly
pressing the shutter release button. (Shutter speed
and aperture are shown in 1/3 steps.)
pressing the shutter release button. (Shutter speed
and aperture are shown in 1/3 steps.)
• If any warning indications appear in the LCD panel or viewfinder, see
page 46.
·
2
: Shutter speed and aperture can be changed to display settings in
steps of 1/2 or one (page 71).
• After shutter is released, the film automatically advances to the next
frame and the next shot can be taken.
When you reach the end of the film roll, End blinks in
the LCD panel. Press the two film rewind buttons „
simultaneously for approx. 1 sec. to rewind film.
the LCD panel. Press the two film rewind buttons „
simultaneously for approx. 1 sec. to rewind film.
• o–– blinks in the LCD panel during film rewind and the frame counter
counts down backwards until rewind is complete.
• Pictures taken on frames beyond the indicated number of the exposures
for the film roll may be discarded in the process of developing.
·
1
: Film rewind can be changed to start automatically when the end of
a film roll is reached (page 71).
7.
4
Confirm that film is completely rewound, then
remove film cartridge.
remove film cartridge.
• Film is completely rewound when the frame counter shows blinking “E”.
(E appears without blinking when the exposure meter is off.) Open the
camera back away from sunlight and remove the film cartridge by tilting it
to one side.
camera back away from sunlight and remove the film cartridge by tilting it
to one side.
P500 (E) 02.12.27 5:48 PM Page 28
WWW.LENSINC.NET