Samsung ak68-00640c User Manual

ENG-11

ENG-10

S

E T U P

ANYNET JACKS
- Use the Anynet cable to connect the Anynet jack of

your television or AV device.

5.1CH ANALOG AUDIO OUT JACKS
- Connect to an amplifier with 5.1ch analog input jacks.

DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect

to a compatible Dolby Digital receiver.

- Use either an optical or coaxial digital cable to connect

to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.

AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver.

VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on

your television.

- The Video Output in Setup Menu must be set to

COMPONENT(I-SCAN) or COMPOSITE/S-VIDEO.

S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the 

S-Video jack on your television for higher picture
quality.

- The Video Output in Setup Menu must be set to 

COMPOSITE/S-VIDEO.

HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI

jack on your television for the best quality picture.

- If an HDMI cable is connected to an HDMI-compatible

TV, HDMI will be output automatically a maximum of 10
seconds later.

- If you want to use a Video, S-Video or Component

Output, unplug HDMI cable.

COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component

Video in jacks. These jacks provide P

R

, P

B

and Y video. 

- If HDMI/COMPONENT(P-SCAN) Video Output is

selected in Setup Menu, progressive scan mode will
work.

- If COMPONENT(I-SCAN) Video Output is selected in

Setup Menu, interlaced scan mode will work.

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN). 

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.

- If HDMI/COMPONENT(P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do

not work.

- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion

adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

- There may be no image output if the DVD player is connected to a TV or display that is not compatible with

the above format.

- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.

- See pages 65 ~ 67 to get more information on how to use the setup menu.

S

E T U P

DVD POWER Button
Turns the power on or off.

PROG Button
Allows you to program a specific order.

STEP Button
Advances play one frame at a time.

VOL (+, -) Buttons
Control volume.

TV/VIDEO Button
Press to display all of the available video sources 
( i.e., TV, Cable, Video)

VIDEO SEL. Button
Selects Video output format.

Allow you to search forward/backward through a disc.

Use to skip the title, chapter or track.

Brings up the DVD player’s menu.

Returns to a previous menu.

Enlarges DVD picture.

Use this button to access various audio functions on a disc.

Use to skip the INDEX.

Selects Super Audio CD or CD playback mode.

Turns the TV’s power on or off.

Use to remove menus or status displays from the screen.

This function skips playback ahead 10 seconds.

This function is used to replay the previous 10 seconds
of a movie from the current position.

Channel selection.

To open and close the disc tray.

HDMI or DVI Output resolution setup.

Begin/Pause disc play.

Displays the current disc mode.

Brings up the Disc menu.

… † œ

œ

√

This button functions as a toggle switch.

The aspect ratio of a picture can easily be adjusted
according to the screen size of your TV (16:9 or 4:3).

Use to access various camera angles on a DVD.

Allows you to repeat play a title, chapter, track, or disc.

Use to skip the PAGE.

Performs fast motion play.

Operates frame by frame play. In CD mode, 
performs track search.

HD950-XSS-1  6/11/05  9:49 AM  Page 10