Samsung bn68-01981d-01 User Manual

No sound or picture

Check that the mains lead has been connected to a wall socket.

Check that you have pressed the button on your set.

Check the picture contrast and brightness settings.

Check the volume.

●

●

●

●

Normal picture but no sound

Check the volume.

Check whether the 

MUTEM button has been pressed on the remote control.

Check the 

Speaker Select settings.

●

●

●

Screen is black and power indicator 

light blinks steadily

On your computer check; Power, Signal Cable.

The TV is using its power management system.

Move the computer’s mouse or press any key on the keyboard.

●

●

●

No picture or black and white picture

Adjust the colour settings.

Check that the broadcast system selected is correct.

●

●

Sound and picture interference

Try to identify the electrical appliance that is affecting the set and move it further away.

Plug your set into a different mains socket.

●

●

Blurred or snowy picture, distorted 

sound

Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

●

●

Remote control malfunctions

Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check the battery terminals.

●

●

●

‘Check signal cable.’ message is 

displayed

Check that the signal cable is firmly connected to the PC or video sources.

Check that the PC or video sources are turned on.

●

●

On PC mode, ‘Not Supported Mode.’ 

message is displayed

Check the maximum resolution and the frequency of the video adaptor.

Compare these values with the data in the Display Modes.

●

●

The damaged picture appears in the 

corner of the screen

If 

Screen Fit is selected in some external devices, the damaged picture may appear in 

the corner of the screen. This symptom is caused by external devices, not TV.

The ‘Resets all settings to the default 

values.’ message appears.

This appears when you press and hold the 

EXIT button for a while. The product settings 

are reset to the factory defaults.

You may see small particles if you 

look closely at the edge of the bezel 

surrounding the TV screen.

This is part of the product’s design and is not a defect.

The TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce. 

However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the 

product.

(Diagonal)

26 inches

32 inches

Standby

<1W

<1W

(Optimum)

1360 x 768 @ 60Hz

1360 x 768 @ 60Hz

(Output)

10W X 2

10W X 2

Body

With stand

670 x 75 x 455 mm

670 x 216 x 495 mm

800 x 85 x 531 mm

800 x 252 x 577 mm

With Stand 

8 kg

12 kg

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

Left / Right

0˚

-20˚ ~ 20˚

Design and specifications are subject to change without prior notice.

This device is a Class B digital apparatus.

For the power supply and Power Consumption, refer to the label attached to the product.

¦

N

¦

N
N
N

BN68-01981D-X0Eng.indd   25

2009-03-04   �� 2:19:37