Samsung dvd-v6600 User Manual
English - 13
Connecting an Audio/Video Input
Cable
Cable
You can connect other audio/video equipment to
your DVD-VCR using audio/video cables if the
appropriate outputs are available on the equip-
ment chosen.
Examples :
• You wish to copy a video cassette with the
your DVD-VCR using audio/video cables if the
appropriate outputs are available on the equip-
ment chosen.
Examples :
• You wish to copy a video cassette with the
help of a second VCR.
• You wish to play and/or copy pictures taken
with a camcorder.
• Make sure that both the external devices and
the DVD-VCR are switched off before connect-
ing the cables.
ing the cables.
1
Connect one end of the video cable into the
VIDEO input jack on the front of the DVD-
VCR.
VIDEO input jack on the front of the DVD-
VCR.
2
Plug the other end of the video cable into the
appropriate output connector on the other
system (VCR or Camcorder, etc).
appropriate output connector on the other
system (VCR or Camcorder, etc).
3
Connect one end of the audio cable supplied
into the AUDIO input jacks on the front of the
DVD-VCR.
• Take care to respect the colour coding of
into the AUDIO input jacks on the front of the
DVD-VCR.
• Take care to respect the colour coding of
the left and right channels.
4
Plug the other end of the audio cable into the
appropriate output connectors on the other
system (VCR, camcorder, etc).
appropriate output connectors on the other
system (VCR, camcorder, etc).
Plug & Auto Setup
Your DVD-VCR will automatically set itself up
when it is plugged into the mains for the first
time. TV stations will be stored in memory. The
process takes a few minutes. Your DVD-VCR
will then be ready for use.
when it is plugged into the mains for the first
time. TV stations will be stored in memory. The
process takes a few minutes. Your DVD-VCR
will then be ready for use.
1
Connect the RF Cable as indicated on page
9. (Connecting Your DVD-VCR to the TV
using the RF Cable).
9. (Connecting Your DVD-VCR to the TV
using the RF Cable).
2
Plug the DVD-VCR into the mains.
• “AUTO” in the front panel display flickers.
• “AUTO” in the front panel display flickers.
3
Start the auto setup.
4
Start the auto scanning.
The number of stations automatically stored
by the DVD-VCR depends on the number of
stations that it has found.
by the DVD-VCR depends on the number of
stations that it has found.
2
3
1
4
Auto Setup will be
started.
Check antenna and TV
cable connection.
OK RETURN
MENU
Please Wait
10%
RETURN MENU
Auto Setup
XEU ENG 2 27/02/2006 13:35 Page 13