Samsung dvd-v5600 User Manual

English - 13

You can connect other audio/video equipment to
your DVD-VCR using audio/video cables if the
appropriate outputs are available on the equip-
ment chosen.
Examples :
• You wish to copy a video cassette with the

help of a second VCR.

• You wish to play and/or copy pictures taken    

with a camcorder.

• Make sure that both the external devices and

the DVD-VCR are switched off before connect-
ing the cables.

Connect one end of the video cable into the
VIDEO input jack on the front of the DVD-
VCR.

Plug the other end of the video cable into the
appropriate output connector on the other 
system (VCR or Camcorder, etc).

Connect one end of the audio cable supplied
into the AUDIO input jacks on the front of the
DVD-VCR.
• Take care to respect the colour coding of

the left and right channels.

Plug the other end of the audio cable into the
appropriate output connectors on the other 
system (VCR, camcorder, etc).

Your DVD-VCR will automatically set itself up
when it is plugged into the mains for the first
time. TV stations will be stored in memory. The
process takes a few minutes. Your DVD-VCR
will then be ready for use.

Connect the RF Cable as indicated on page
9. (Connecting Your DVD-VCR to the TV
using the RF Cable).

Plug the DVD-VCR into the mains.
• “AUTO” in the front panel display flickers.

Start the auto setup.

Start the auto scanning.

The number of stations automatically stored
by the DVD-VCR depends on the number of
stations that it has found. 

ŠŠ

XEU ENG 2   27/02/2006  13:35  Page 13