Samsung dvd-v5600 User Manual
24
- English
Selecting the Recording Speed
Video cassettes have a safety tab to prevent
accidental erasure. When this tab has been
removed, you cannot record on the tape.
accidental erasure. When this tab has been
removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the
tab using a small screwdriver.
tab using a small screwdriver.
2
To re-record over a protected cassette (safety
tab broken), cover the hole with adhesive
tape.
tab broken), cover the hole with adhesive
tape.
You can record a cassette at two different
speeds:
• SP (Standard Play)
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
speeds:
• SP (Standard Play)
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
1
Press the SPEED button to select SP or LP.
• The selected record speed will appear on
• The selected record speed will appear on
the front panel display.
Type
Recording Time (in SP)
E180
180 mins. or 3 hours
E240
240 mins. or 4 hours
E260
260 mins. or 4 hours and 20 mins.
E300
300 mins. or 5 hours
Protecting a Recorded Cassette
Recording a Programme
Immediately
Immediately
Before recording a programme, you must have
preset the corresponding station (unless you are
recording via an external video source). If you
have not done so, refer to pages 16~17.
preset the corresponding station (unless you are
recording via an external video source). If you
have not done so, refer to pages 16~17.
1
Switch on the television.
2
Insert the video tape in to the VCR deck, with
the window visible and the safety tab intact or
the opening covered with adhesive tape. The
DVD-VCR is switched on automatically.
the window visible and the safety tab intact or
the opening covered with adhesive tape. The
DVD-VCR is switched on automatically.
3
Select the station by pressing the PROG
( or ) button or select the source (AV1,
AV2 or AUX) by pressing the INPUT SEL.
button for a satellite tuner or external video
source. The station number is displayed and
the programme can be seen on the television.
( or ) button or select the source (AV1,
AV2 or AUX) by pressing the INPUT SEL.
button for a satellite tuner or external video
source. The station number is displayed and
the programme can be seen on the television.
4
Select the recording speed by pressing the
SPEED button as many times as required.
SPEED button as many times as required.
5
Hold down the REC (
●) button for a while to
start recording.
The record indicator appears on the television
and DVD-VCR display. An index is recorded
on the tape (Refer to page 30).
The record indicator appears on the television
and DVD-VCR display. An index is recorded
on the tape (Refer to page 30).
6
To stop recording, press the
■ button once.
• If your DVD-VCR ejects the cassette when
you start recording, check to make sure
that the cassette’s safety tab is intact or
that the opening (Created by a broken
safety tab) is overed with adhesive tape.
that the cassette’s safety tab is intact or
that the opening (Created by a broken
safety tab) is overed with adhesive tape.
• If you reach the end of the tape while
recording, the cassette rewinds
automatically.
automatically.
XEU ENG 4 27/02/2006 13:36 Page 24