Samsung dvd-v5600 User Manual
38
- English
Firmware Upgrade
Please read the below information before
update procedure.
update procedure.
1
The following events may interrupt the update
procedure and may result in permanent
damage to DVD-VCR.
• Unplugging the power cord.
• Power outage.
• Dirt or Scratch in the discs.
• Open a tray door during processing.
procedure and may result in permanent
damage to DVD-VCR.
• Unplugging the power cord.
• Power outage.
• Dirt or Scratch in the discs.
• Open a tray door during processing.
2
Playback can only support English Subtitle.
If you have any question or any problem,
please feel free to contact your nearest
SAMSUNG Service Center and agency.
If you have any question or any problem,
please feel free to contact your nearest
SAMSUNG Service Center and agency.
DivX Feature Table
• A DivX disc may not be playable as playback
depends on the file format, the recording
conditions, the recording method, etc.
conditions, the recording method, etc.
• A video file that has not been interleaved
supports only voice or video.
• Check the DivX disc format as this is not an
error.
• Normal operation is only possible when the
screen size is 720X480 pixels or less.
• A maximum of 65 characters for the caption
title of a DivX disc is supported.
• Unsupported caption content will be
displayed using asterisks (*).
DivX can be divided into Video and Audio.
S
upported CODEC formats
DivX3, DivX4, DivX5 (GMC 1WP)
Supported file format
s
*.avi, *.mpeg
Supported audio formats
AC3, MP3, WMA
Supported caption formats
* .SMI, * .SRT, * .SUB
How to make an update disc
Write the downloaded file onto a blank CD-R
disc, using the following settings.
disc, using the following settings.
1
Download the software update file from the
Samsung Internet Site
(http://www.samsung.com/Support/Product
Support/Download/index. aspx).
After checking your DVD-VCR Model name
on the rear, download a file using the Search
Your Model/Name window.
Samsung Internet Site
(http://www.samsung.com/Support/Product
Support/Download/index. aspx).
After checking your DVD-VCR Model name
on the rear, download a file using the Search
Your Model/Name window.
2
Write the file to disc using CD-R driver of your
computer.
Software update file name: samca.rom
Please do not change the file name.
If you change the file name, DVD-VCR do not
recognize the update CD-R.
computer.
Software update file name: samca.rom
Please do not change the file name.
If you change the file name, DVD-VCR do not
recognize the update CD-R.
Update procedure
1
Insert the update CD-R disc with the software
update. It takes about 30 seconds to load the
update disc.
update. It takes about 30 seconds to load the
update disc.
2
READING appears at the left upper side of
the screen.
the screen.
READING
Loading
• Recommended Application Program
- Nero Burning / Easy CD Creator.. etc
• Option
- Multisession; No Multisession
- CD close or Finalized CD
- CD close or Finalized CD
• In order to increase Disc Playability, add a dummy
file (over 100MB) together with the update file in
CD-R, not CD-RW. (The Dummy File can be used
any kind of file except jpg, mp3, wma file. Zip file
format is recommended).
CD-R, not CD-RW. (The Dummy File can be used
any kind of file except jpg, mp3, wma file. Zip file
format is recommended).
Note
XEU ENG 5 27/02/2006 13:37 Page 38