Samsung dvd-v5600 User Manual

English - 9

RF cable

Aerial

RF cable

Aerial

To receive television programmes a signal must
be received from one of the following sources:
• An outdoor aerial.
• An indoor aerial.
• A cable television network.
• A satellite receiver.

Remove the aerial or network input cable
from the television.

Connect this cable to the 75Ω coaxial jack
marked

on the rear of your DVD-VCR.

Plug the RF Cable supplied into

the jack

on your DVD-VCR.

Plug the other end of the RF Cable into the
connector previously used for the aerial on
the television.

• Make sure that both the television and the

DVD-VCR are switched off before connect-
ing the cables.

You can connect your DVD-VCR to the televi-
sion using the SCART cable if the appropriate
input is available on the television. You thus:
• Obtain better quality sound and pictures.
• Simplify the setting up procedure of your 

DVD-VCR.

Connect the Aerial Cable.

Connect one end of the SCART cable to the
AV1 (EURO AV) jack on the rear of the DVD-
VCR.

Plug the other end into the appropriate
connector on the television.

You can connect your DVD-VCR to a Hi-Fi
system. Example: You wish to take advantage of
the quality of your Hi-Fi stereo system when
watching a disc play.

Plug the audio output cable into the audio
connectors on the rear of your DVD-VCR.

Plug the other end of the audio cable into the
appropriate input connectors on your Hi-Fi
stereo system.

•

Regardless of the type of connection chosen,
you must always connect the RF Cable supplied.
Otherwise, no picture will be visible on the
screen when the DVD-VCR is switched off.

•

Make sure that both the television and the DVD-
VCR are switched off before connecting the
cables.

XEU ENG 2   27/02/2006  13:35  Page 9