Samsung iDCS 500-DCS User Manual

From the factory, your station passcode is 1234. You can change your sta-
tion passcode whenever you desire. 

• While on-hook, press TRSF and then dial 101.
• Dial your old passcode.
• Dial a new passcode (must be four characters). You can use 0–9.
• Redial the new passcode to verify. If successful, you will hear two beeps.

Four beeps indicate an incorrect code. Reenter the code again.

• Press TRSF to store the new passcode.

You can receive internal calls in one of three modes (see Answering Intercom
Calls under Intercom Calls for descriptions):

• While on-hook, press TRSF and then dial 103.
• Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.
• Press TRSF to store your selection.

NOTE: When your keyset is programmed for Auto Answer and you have For-
ward No Answer (FNA) turned on, you must answer screened transfers by
pressing ANS/RLS or the MONITOR key if you are using a 7B phone before
your FNA timer expires or the call will forward.

While on an outside call, pressing a line key, route key or a flashing CALL
button will automatically put your call on hold and connect you to the next
call. This feature can be turned on or off at your keyset.

• With the handset on-hook, press TRSF and then dial 110.
• Dial 001 to turn Automatic Hold on or 000 to turn it off.
• Press TRSF to store your selection.

NOTE: Intercom calls can only be automatically put on hold by pressing
TRSF.

41

40

This feature selects whether a station using Answer Machine Emulation will
hear their personal greeting or BGM while callers are listening to the per-
sonal greeting. A BGM source must be selected for this to work. This feature
only applies if there is a CADENCE card installed in the system and your key-
set has a programmed AME key.

• While the handset is on-hook, press TRSF and then dial 110.
• Press 091 to turn on AME BGM or 090 to turn it off.
• Press TRSF to store your selection.

This feature allows people using the AME feature to enable password pro-
tection. This will prevent unauthorized people from listening to your mes-
sages being left. The passcode is the same as your station passcode. This
feature only applies if there is a CADENCE card installed in the system and
your keyset has a programmed AME key.

• With the handset on-hook, press TRSF and then dial 110.
• Dial 101 to turn on AME PASSWORD or 100 to turn it off.
• Press TRSF to store your selection.

This option allows intercom calls to be automatically camped on, if possible,
when a busy station is called.

• With the handset on-hook, press TRSF and then dial 110.
• Press 081 to turn CAMP-ON on or 080 to turn it off.
• Press TRSF to store your selection.

Each keyset user can select any one of eight ring frequencies:

• While on-hook, press TRSF and then dial 111.
• Dial 1–8 or press the UP and DOWN keys to hear each tone.
• When you hear the tone that you prefer, press TRSF to save it.

NOTE: Specific lines or stations may be programmed to ring with a different
tone than what you have selected for you keyset.