Samsung SCX-4100 User Manual

A.11

Envelopes with a peel-off adhesive strip or with more than one flap that folds over to 

seal must use adhesives compatible with the heat and pressure in the machine. The 

extra flaps and strips might cause wrinkling, creasing or even jams and may even 

damage the fuser.

The following gives typical address margins for a commercial #10 or DL envelope.

:

• For the best print quality, position margins no closer than 15 mm (0.6 in.) from the 

edges of the envelope.

• Avoid printing over the area where the envelope’s seams meet.

Proper storage of envelopes helps contribute to print quality. Envelopes should be 

stored flat. If air is trapped in an envelope, creating an air bubble, then the envelope 

may wrinkle during printing.

Return address

15 mm (0.6 in.)

51 mm (2 in.)

Delivery address

51 mm (2 in.)

90 mm (3.5 in.)