Samsung sv-dvd54t User Manual

Press OK button. 

Press OK to start the auto scanning.

◆

The number of stations automatically stored by 
the STB-DVD-VCR depends on the number of
stations found. 

◆

“AUTO” appears in the Front Panel.

The time and date are displayed automatically. 
To set Time and Date, see page 10.

➢

Plug & Auto Set up tunes only the analog

broadcasting. 

➢

Switch on the television.

Switch on the STB-DVD-VCR by pressing
STANDBY/ON on the front of the STB-DVD-VCR or
STANDBY/ON on the remote control.

Select a programme position on the television to be
reserved for use with your STB-DVD-VCR.

Insert the video cassette in the STB-DVD-VCR.
Check that the STB-DVD-VCR starts playing the
cassette; if not, press 

❿

button. 

Start tuning your television or set the television to
UHF channel 38.

Fine tune the television until the pictures and sound
are obtained clearly. 

If you cannot find the pictures and sound, or there
is interference from nearby channels, it may be
necessary to change the setting of the STB-DVD-
VCR output channel (see Setting the STB-DVD-
VCR Output Channel on page 14 and
Troubleshooting Guide on page 49.

When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television. 
Result: That channel is now tuned for use with

your STB-DVD-VCR.