Samsung sv-dvd54t User Manual
ENG-24
Searching for a Specific Sequence
➢
This STB-DVD-VCR uses a standard indexing
system (VISS). As a result, it will recognize any
indexes marked by other VCRs using the same
system and vice versa.
system (VISS). As a result, it will recognize any
indexes marked by other VCRs using the same
system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for the
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
1
After pressing the SEARCH, press the
corresponding
corresponding
or
❷
buttons, until the Go To
[0:00:00] option is selected.
2
Press the OK or
❿
.
Each time you record a cassette on this STB-DVD-VCR,
an “index” is automatically marked on the tape when
recording starts.
an “index” is automatically marked on the tape when
recording starts.
The Search function allows you to fast-forward or
rewind to a specific index and start playback from that
point. Depending on the direction selected, the indexes
are numbered as follows:
rewind to a specific index and start playback from that
point. Depending on the direction selected, the indexes
are numbered as follows:
2
1
1
2
➞
etc.
Prev
Seq.
Seq. being
played
Next
Seq.
etc.
STB
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
position to record a program on a cassette.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that position.
If the VCR reaches the end of the tape during end
search, the tape will be ejected.
position, and then automatically stop at that position.
If the VCR reaches the end of the tape during end
search, the tape will be ejected.
1
After pressing the SEARCH, press the
corresponding
corresponding
or
❷
buttons, until the End
Search option is selected.
2
Press the OK or
❿
.
Intro Scan
1
After pressing the SEARCH, press the
corresponding
corresponding
or
❷
buttons, until the Intro Scan
option is selected.
2
Press the OK or
❿
.
3
Press the
➛➛
or
❿❿
buttons depending on the
direction where your desired programme is located.
4
When an Index mark is found, the STB-DVD-VCR
will playback the tape for 5 seconds, after which it
will continue searching for the next Index mark.
will playback the tape for 5 seconds, after which it
will continue searching for the next Index mark.
5
If you want to watch the tape from a particular
Index, simply press
Index, simply press
❿
II twice.
INTRO SCAN:
➛➛ ❿❿
STB