Samsung sv-dvd54t User Manual

ENG-51

Troubleshooting Guide (STB)

No pictures on the screen

Receiver in Standby mode;

Set receiver to “On”;

Scart not connected tightly

Check connection and correct;

to video output of television;
incorrect channel or video

Check channel and video output and

output selected on television

correct (TV instruction manual)

No sound

Audio cord connected

Check connection and correct;

incorrectly;
Loudness level = 0;

Increase loudness on television set;

Muting active

Press the MUTE key

Remote Control does not

incorrect operation;

Point remote control

operate directly

towards the Receiver.

Batteries dead or inserted

Replace batteries or insert correctly

incorrectly

Poor picture quality

Signal strength too low

Check the signal strength in
the “Auto Scanning” menu, correct
alignmenta of your antenna

On-Screen Error Message

Antenna cable not connected

Check connection and correct;

“Searching for signal”

or not tight;
incorrect position of the

Check position and correct,

antenna;

Check the signal strength in
the “Auto Scanning” menu

On-Screen Error Message

Rereiver not yet set

Scanning of in “Automatic scanning”

“Channel data

or “Manual scanning” menu

does not exist.”

Problem

Possible cause

Solution of the problem

In some region, the digital terrestrial signal may be weak.So you’d better use the antenna in which the booster

was built, for watching the weak sinal channels.

You can download and upgrade the system software of the receiver through a specific channel through a specific
channel designated by the broadcaster.The Distributor will provide you with more information about that.

Disposal

The device, packaging material (e.g. Styrofoam) and the batteries must never
be disposed of with household refuse.
Please obtain appropriate information about the regulations in your community,
and dispose of all refuse in accordance with regulations at the separate locations provided.