Samsung UN60EH6000 User Manual

- 2 -

Getting Started

Accessories

• Remote Control (AA59-00600A) &

Batteries (AAA x 2)

• Warranty Card / Safety Guide

•  Owner’s Instructions
•  Power Cord
•  Wire Holder Stand (BN61-05491A)

Input Cables (Sold Separately)

•  RS232 (AA39-00311A)
•  Audio
•  HDMI
•  HDMI-DVI

•  Component
•  Composite (AV)
•  Coaxial (RF)

✎

Check the cable before plug-in

Cable

Ports

HDMI

USB

Optical

Do not plug cable upside down.
Be sure to check before plug-in.

TV Controller (Panel Key)

Power on

Turns the TV on by pressing the controller in standby mode.

Adjusting the volume

Adjusts the volume by moving the controller from side to

side when the power is on.

Selecting a channel

Selects a channel by moving the controller up and down

when the power is on.

Using the function menu

Press the controller when the power is on, then the function

menu screen appears. If you press it again, the function

menu screen disappears.

Selecting the Media Play

Selects the MEDIA.P by moving the controller in the
function menu screen. The Media Play main screen
appears.

Selecting the MENU (m)

Selects the MENU(m) by moving the controller in the

function menu screen. The OSD(On Screen Display) of your

TV’s feature appears.

Selecting the Source
List (s)

Selects the Source List(s) by moving the controller in the

function menu screen. The Source List screen appears.

Power Off (P)

Selects the Power Off (P) to turn the TV off by moving the

controller in the function menu screen.

✎

Exits the menu when pressing the controller more than 1 second.

✎

When selecting the function by moving the controller to the up/down/left/
right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the first time, a sequence of on-screen

prompts will assist in configuring basic settings. Press the

POWER

button. Plug & Play is available only when the Input source is set to

TV.

✎

Connecting the power cord and antenna. (refer to

‘Connections’)

Selecting a language

Select Language of the OSD.

Language

U Move

E Enter

Plug & Play









English
Español
Français

Select the desired OSD (On Screen

Display) language.



Selecting a Home Use mode

Select ‘Home Use’ when installing this TV in your home.

L Move

E Enter

Plug & Play

Home Use

Store Demo









• Select the Home Use mode. Store

Demo mode is for retail environments.

• When pressing TV controller, the

function menu screen appears. Select

the MENU(m) and press it more than 5

seconds using the controller. The Store

Demo mode is set. Cancel the Store

Demo by selecting Source List(s)

and pressing it more than 5 seconds.



Selecting an antenna

Select the Antenna source to memorize.

Air

Start

Cable

Start

Auto

Start

U Move

E Enter

m Skip

Plug & Play









In Cable mode, you can select the correct

signal source among STD, HRC, and IRC

by pressing the

▲, ▼, ◄ or ► button.



Setting the Clock Mode

Set the Clock Mode.

Clock Mode

: Auto

Plug & Play

E Enter

m Skip









Set the Clock Mode automatically or

manually.
• If you select the Auto, set the

DST(Daylight Saving Time).

• On the DST screen, press

ENTER

then select whether to turn DST

(Daylight Savings Time) on or off. Select

the time zone where you live.



Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.



Enjoy your TV.

Press the

ENTER

button.

Remote control sensor

TV Controller

Function menu

MEDIA.P

m R s

Return