Sony 2-678-737-13(1) User Manual

Chapter 2

Playback and Recording

31

Chapter 2   Playback and Recording

Connect the power cord (supplied) to the AC IN
connector. Then, connect the power plug to the wall
outlet.
When you disconnect from the wall outlet, be sure to
unplug the power plug from the wall outlet first.
[CLOCK SET] screen appears when you turn on the
unit for the first time.

• Do not insert the cassette forcibly. The unit may be

damaged.

• Do not eject/load the cassette in a place subject to

light. The internal sensor of the unit may operate
incorrectly if too much light falls on the unit.

After checking the tape for slack, hold the cassette so
that the tape window is facing upward, then insert it
into the unit.

• When inserting a cassette, hold the back edge of the

cassette in the center and push it until the cassette is
inserted deep into the unit. If you hold the ends, the
cassette may not be loaded properly.

• If the cassette does not load or is loaded only

halfway, eject it once, then insert it again. In such a
case, if you insert the cassette forcibly, the cassette
may not be loaded properly or malfunctions may
occur.

• It takes a few seconds for the unit to recognize the

cassette and find the proper location on the tape being
loaded.

With the unit powered on, press EJECT button.

The cassette is unloaded and ejected.

No compensation for contents of the
recording
Contents of the recording cannot be compensated for if
recording or playback is not successful due to a
malfunction of the unit, video tape, etc.

Copyright precautions
Television programs, films, video tapes, and other
materials may be copyrighted. Unauthorized recording
of such materials may be contrary to the copyright
laws.

Mini cassette
(Insert the mini cassette
into the center of the
cassette compartment.)

Standard
cassette

Tape window facing upward