Sony 2-678-737-13(1) User Manual
36
Chapter 2
Playback and Recording
Chapter 2 Playback and Recording
Playback Functions
This section describes useful functions during
playback.
playback.
Displaying information (data codes)
recorded on a tape
recorded on a tape
If you record on a tape using a Sony digital HD video
camera recorder or digital camcorder, the recording
information (data codes) is recorded on the tape.
The data codes consist of recording date/time and
camera data (the shutter speed, SteadyShot, iris, white
balance, program AE mode, gain, date and time).
You can check these data items during playback on the
unit.
camera recorder or digital camcorder, the recording
information (data codes) is recorded on the tape.
The data codes consist of recording date/time and
camera data (the shutter speed, SteadyShot, iris, white
balance, program AE mode, gain, date and time).
You can check these data items during playback on the
unit.
Each time you press DATA CODE button on Remote
Commander, the display changes in sequence as
follows:
no data code
Commander, the display changes in sequence as
follows:
no data code
t recording date/time t camera data
t no data code ..... Also, you can change the display
by setting [DATE] or [CAMERA DATA] of [DATA
CODE] in [DISPLAY SET] menu.
by setting [DATE] or [CAMERA DATA] of [DATA
CODE] in [DISPLAY SET] menu.
For details, see “DATA CODE” on page 72.
Notes
• If data codes were not recorded, “- - -” appears
instead.
• The unit cannot record camera data.
• Some of the camera data items displayed by the unit
• Some of the camera data items displayed by the unit
are different from those shown on the digital
camcorder and digital HD video camera recorder.
camcorder and digital HD video camera recorder.
Playback
No indicator
Recording
date/time
date/time
Camera
data
data
Date
AUTO
2006 1 1
19 : 20 : 30
ATW
AUTO
Time
SteadyShot
Program AE
Iris
Iris
Gain
White balance
Shutter speed