Sony 2-678-737-13(1) User Manual
Chapter 6
Maintenance
85
Chapter 6 Maintenance
Symptom
Cause/Remedy
The output from S VIDEO OUT jack and
VIDEO OUT jack is different from [DOWN
CONVERT] setting of [VIDEO OUT] in [IN/
OUT REC].
VIDEO OUT jack is different from [DOWN
CONVERT] setting of [VIDEO OUT] in [IN/
OUT REC].
The output from S VIDEO jack and VIDEO jack is set as follows.
• When the playback format is set shown below, the output from S VIDEO jack or
• When the playback format is set shown below, the output from S VIDEO jack or
VIDEO jack is fixed in EDGE CROP.
• When the playback format is set shown below, the output from S VIDEO jack or
VIDEO jack is fixed in LETTER BOX.
Menu item
Setting
Playback format
HDV (HDV1080i)
[VIDEO OUT] in
[DOWN CONVERT]
SQUEEZE or
LETTER BOX
LETTER BOX
[IN/OUT REC]
[HDMI/CMPNT]
480p/480i, 576p/576i
[i.LINK SET] in
[HDV
t DV CONV]
DVCAM or DV SP
[IN/OUT REC]
[DOWN CONVERT]
Set to EDGE CROP
Menu item
Setting
Playback format
HDV (HDV1080i or
HDV720p)
HDV720p)
[VIDEO OUT] in
[HDMI/CMPNT]
480i, 576i, 480p/480i,
[IN/OUT REC]
576p/576i
[ALLSCAN MODE] in [DISPLAY SET]
ON
Recording/Dubbing
Symptom
Cause/Remedy
Whenever you connect the unit to an AC
outlet, the unit automatically starts
recording.
outlet, the unit automatically starts
recording.
Even though KEY INH switch is set to ON,
the unit starts recording/playback by itself.
the unit starts recording/playback by itself.
No picture is output via HDV/DV jack.
• TIMER switch is set to REC.
t When TIMER switch is set to REC, the unit starts recording whenever the
power is connected. Set TIMER switch to OFF.
• TIMER switch is set to REPEAT or REC.
t TIMER switch setting has a higher priority than KEY INH switch setting. Set
TIMER switch to OFF.
• When [COMMANDER] in [OTHERS] menu is set to [WIRELESS], the unit
responds to signals from Remote Commander even though KEY INH switch is set
to ON.
t Set [COMMANDER] to [CONTROL S].
to ON.
t Set [COMMANDER] to [CONTROL S].
t Reconnect the i.LINK cable (not supplied).
• INPUT SELECT switch is set to a position other than HDV/DV.
• INPUT SELECT switch is set to a position other than HDV/DV.
t Set the switch to HDV/DV.
t Set [HDV/DV SEL] in [IN/OUT REC] menu correctly.
t Set [HDV/DV SEL] in [IN/OUT REC] menu correctly.
(Continued)