Sony 1500AP User Manual
85
Connections for a Digital Non-Linear Editing System
Chapter
5
Connections and
Settings
Connections for a Digital Non-Linear Editing System
This unit can be connected to an ES-7 EditStation to
configure a digital non-linear editing system.
If you use the SDTI (QSDI) interface with the optional
DSBK-1501 board installed in the unit, you can transfer
video, audio, time code, and other compressed data
between this unit and the ES-7.
The unit supports ClipLink functions, enabling index
pictures recorded on tape and ClipLink log data stored in
cassette memory to be transferred to the ES-7 in an instant.
configure a digital non-linear editing system.
If you use the SDTI (QSDI) interface with the optional
DSBK-1501 board installed in the unit, you can transfer
video, audio, time code, and other compressed data
between this unit and the ES-7.
The unit supports ClipLink functions, enabling index
pictures recorded on tape and ClipLink log data stored in
cassette memory to be transferred to the ES-7 in an instant.
For a general description of ClipLink functions, see the
appendix “ClipLink Guide” (page 113).
appendix “ClipLink Guide” (page 113).
The following figure shows a connection diagram for a
non-linear editing system in which this unit serves as the
recorder.
non-linear editing system in which this unit serves as the
recorder.
For connections of the ES-7 and its peripheral devices
such as the ESBK-7011 Control Panel, the ESBK-7045
Disk Unit, etc., refer to your ES-7 Operating Instructions.
such as the ESBK-7011 Control Panel, the ESBK-7045
Disk Unit, etc., refer to your ES-7 Operating Instructions.
Note
The DSR-1500A/1500AP unit shown in the following
figure is fitted with the optional DSBK-1501 and DSBK-
1504/1504P boards.
figure is fitted with the optional DSBK-1501 and DSBK-
1504/1504P boards.