Sony 120-250gb playstation 3 cech-2101a User Manual

30

Adjusting network settings

Select the access point that you want to use. You can usually select [Scan] 
and choose an access point within range of your system. 

System scans for a nearby access point. Select the 
access point that you want to use. 

Specify the access point by entering its SSID manually.

Use the automatic setting feature of the access point.
You can follow the on-screen instructions to complete 
the required settings automatically.

AOSS™
Buffalo, Inc.

*  For information on access points that support automatic setup (AOSS™), 

contact the access point manufacturers.

Enter the encryption key for the access point. If you selected [Automatic] in 
step 6, this screen will not be displayed. 

Encryption key is not set.

Enter the encryption key. The encryption key field will 
display an asterisk (*) for each character you enter.

A list of the settings is displayed. If the list is not displayed, you must adjust 
custom settings. Refer to the instructions supplied by your Internet service 
provider to adjust the custom settings (  page 31). 

If the connection is successful, you will be able to connect to the Internet.

 SSID and WEP/WPA keys are types of security information that are required 

when connecting to an access point. If you do not have this information, 

contact the person who set up or maintains the access point. 

 Depending on the access point you use, you may need the MAC address for 

the PS3™ system when connecting to the Internet. You can find the MAC 

address for the PS3™ system by going to 

 (Settings)   

 (System 

Settings)   [System Information]. 

 When connecting to the Internet wirelessly, signal interference may occur 

depending on the usage condition of the wireless network devices. If the 

Internet data transfer speed is decreased or the wireless controller does not 

function properly, try using a wired Internet connection.