Sony 2-680-009-12 (1) User Manual

Page of 64
40
GB
SL DIST. (Surround left speaker 
distance)
Lets you set the distance from your listening 
position to the surround left speaker. Surround 
left speaker distance should be set from a 
distance equal to the front speaker distance 
(A) to a distance 4.5 meters closer to your 
listening position (C).
SR DIST. (Surround right 
speaker distance)
Lets you set the distance from your listening 
position to the surround right speaker. 
Surround right speaker distance should be set 
from a distance equal to the front speaker 
distance (A) to a distance 4.5 meters closer to 
your listening position (D).
Tip
The receiver lets you to input the speaker position in 
terms of distance. However, it is not possible to set 
the center speaker further than the front speakers. 
Also, the center speaker cannot be set more than
 
1.5 meter closer from the front speakers.
Likewise, the surround speakers can not be set 
further away from the listening position than the 
front speakers. And they can be no more than
 
4.5 meter closer. This is because incorrect speaker 
placement is not conducive to the enjoyment of 
surround sound.
Please note that, setting the speaker distance closer 
than the actual location of the speakers will cause a 
delay in the output of the sound from that speaker. In 
other words, the speaker will sound like it is further 
away.
For example, setting the center speaker distance
 
1-2 meter closer than the actual speaker position will 
create a fairly realistic sensation of being “inside” 
the screen. If you cannot obtain a satisfactory 
surround effect because the surround speakers are 
too close, setting the surround speaker distance 
closer (shorter) than the actual distance will create a 
larger sound stage.
Adjusting these parameter while listening to the 
sound often results in much better surround sound. 
Give it a try!
SUR POS. 
 
(Surround speaker position)
Lets you specify the location of your surround 
speakers for proper implementation of the 
surround effects in the Cinema Studio EX 
modes (page 44). This setup item is not 
available when the surround speakers are set to 
“NO” (page 34).
• SIDE/LO
Select if the location of your surround 
speakers corresponds to sections A and C.
• SIDE/HI
Select if the location of your surround 
speakers corresponds to sections A and D.
• BEHD/LO
Select if the location of your surround 
speakers corresponds to sections B and C.
• BEHD/HI
Select if the location of your surround 
speakers corresponds to sections B and D.