Sony 40gb playstation 3 3-275-579-51 User Manual

Page of 100
26
Network
Adjusting network settings
Preparing the required items
The following items are required to set up the system to connect 
wirelessly to the Internet.
•  A broadband Internet connection via a device such as a DSL or 
cable modem (connection of multiple devices may require 
additional hardware)
•  An access point or wireless router
•  Settings information for the access point (SSID, WEP key, WPA key)
Hints
•  SSID, WEP key, and WPA key are types of security information that are 
required when connecting to an access point.
•  When connecting to the Internet wirelessly, signal interference may occur 
depending on the usage condition of the wireless network devices. If Internet 
data transfer speed is decreased or the wireless controller does not function 
properly, use an Ethernet cable (sold separately) to connect to the Internet.
•  Depending on the access point in use, you may need the MAC address for 
your system when connecting to the Internet. You can fi nd the MAC address 
for the system by going to 
 (Settings) 
 
 (System Settings) 
 "System 
Information".
•  User is responsible for Internet service fees.
Setting up the Internet connection
When connecting wirelessly to the Internet, you must fi rst adjust 
network settings.
Network settings may vary depending on the type of access point 
and the network environment. The following instructions explain the 
most common network confi guration.
1
 Select   (Network Settings) under 
 (Settings) in the home 
menu, and then press the 
 button.
2
  Select "Internet Connection Settings", and then press the 
 button.
When a message stating that the Internet connection will be terminated is 
displayed, select “Yes”, and then press the 
 button.
3
  Select "Wireless", and then press the right button.
4
  Select "Scan", and then press the right button.
The system will search for access points within range and display them as 
a list.
Hint
When using an access point that supports automatic setup, select "Automatic" 
and follow the on-screen instructions. The required settings will be completed 
automatically. For information on access points that support automatic setup, 
contact the access point manufacturers.