Sony 4-296-436-11 (2) User Manual
II-29
Details on [Key] Menu
Cha
p
te
r 2
V
ideo
S
witc
h
in
g
[Key Wipe Modify] Menu
Display the [Key Wipe Modify] menu by pressing the V1 knob while [Key Wipe] (page II-24) is selected.
Menu item Description
Knob Parameter Meaning
Setting range
Reference
page
page
Positioner
Turn the positioner for adjusting the key
wipe position on/off.
If you also select [On] with the V3 knob,
the pattern will move from the location to
which the pattern was moved with the
positioner to the center of the screen as a
result of the transition.
wipe position on/off.
If you also select [On] with the V3 knob,
the pattern will move from the location to
which the pattern was moved with the
positioner to the center of the screen as a
result of the transition.
Tip
The patterns for which the positioner can
be used are as follows.
be used are as follows.
17, 18, 21, 22, 23, and 24
V3
AutoCT
Turns auto
center function
on/off
center function
on/off
Off, On
–
V4
Pos
Turns positioner
on/off
on/off
Off, On
Positioner
Adjust
Adjust
Adjust the key wipe position. If you want
to reset the setting value to “0.00,” press
the V4 knob.
to reset the setting value to “0.00,” press
the V4 knob.
Notes on setting values
Pos H: Negative values adjust the
Pos H: Negative values adjust the
position to the left, positive values to
the right.
the right.
Pos V: Negative values adjust the
position to the bottom, positive
values to the top.
values to the top.
V2
Pos H
Adjusts position
in horizontal
direction
in horizontal
direction
–200.00 to +200.00
(0.00)
(0.00)
–
V3
Pos V
Adjusts position
in vertical
direction
in vertical
direction
–200.00 to +200.00
(0.00)
(0.00)
V4
Center
Resets setting
value to “0”
value to “0”
–
Rotation
Set the rotation method of a key wipe
pattern.
pattern.
V4
Rotate
Rotation type
Off, Angle, Speed,
Mag (magnitude)
Mag (magnitude)
–
Rotation
Adjust
Adjust
Set the parameters depending on the
rotation type selected in [Rotation].
• When [Angle] is selected: Set [Angle].
• When [Speed] is selected: Set [Speed].
• When [Mag] is selected: Set [Angle]
rotation type selected in [Rotation].
• When [Angle] is selected: Set [Angle].
• When [Speed] is selected: Set [Speed].
• When [Mag] is selected: Set [Angle]
and [Mag].
About setting values
Angle: –100.00 corresponds to the state
Angle: –100.00 corresponds to the state
in which the pattern is rotated once
counterclockwise, and +100.00 to
the state in which the pattern is
rotated once clockwise. 0.00
corresponds to a non-rotation state.
counterclockwise, and +100.00 to
the state in which the pattern is
rotated once clockwise. 0.00
corresponds to a non-rotation state.
Mag: –200.00 rotates the pattern twice
counterclockwise, and +200.00
rotates the pattern twice clockwise.
0.00 does not rotate the pattern.
rotates the pattern twice clockwise.
0.00 does not rotate the pattern.
Speed: –100.00 is the speed of one
counterclockwise rotation per
second, and +100.00 is the speed of
one clockwise rotation per second.
0.00 corresponds to a stationary
state.
second, and +100.00 is the speed of
one clockwise rotation per second.
0.00 corresponds to a stationary
state.
V2
Angle
• Pattern
inclination
angle
([Angle])
angle
([Angle])
• Pattern
inclination
angle when
transition
starts ([Mag])
angle when
transition
starts ([Mag])
–100.00 to +100.00
(0.00)
(0.00)
V3
Mag
Amount of
rotation during
transition
rotation during
transition
–200.00 to +200.00
(0.00)
(0.00)
V4
Speed
Pattern rotation
speed
speed
–100.00 to +100.00
(0.00)
(0.00)