Sony 42lx1e User Manual

16

 (GB)

Using On-screen Menus

Use the buttons on the display unit or the Remote
Commander for menu operations.

MENU

ENTER

Operation of the unit is explained in these operating
instructions for the case of operation using the Remote
Commander. The 

M/m and ENTER buttons on the

Remote Commander have the same functions as the
M/m and ENTER buttons on the display.

Operation may differ in some cases since there is no
</, button on the display.

Press MENU.
The main menu appears on the screen.

PICTURE/SOUND CONTROL

Picture Mode:

Adjust Picture

Adjust Sound

Standard

Set

Exit

Select

Press 

M/m to move the cursor (yellow) to the main

menu items you want to select and press ENTER.
The cursor moves to the next menu.

Press 

M/m to move the cursor (yellow) to the item

you want to select and press ENTER.
The menu for the selected item appears.
Select an different item by repeating this
procedure.

Press 

M/m to adjust or select the setting and press

ENTER to set it.
The setting is registered and the menu returns to
the previous menu.

To complete the configuration and return to the
normal screen, press MENU.
To return to the previous menu level, press 

M/m to

move the cursor to 

 and press ENTER or 

<.

Items that cannot be set or adjusted (depending on the
setting or the type of signal input) show in dark gray.

Adjusts the quality of sound and picture.

PICTURE/SOUND CONTROL

Picture Mode:

Adjust Picture

Adjust Sound

Standard

Set

Exit

Select

Picture Mode
Sets the image quality suitable for the type of picture
or the brightness of the location where the unit is
installed.

You can make fine adjustment of the picture.
Set Picture Mode to any of “User1” to “User3” first.

You cannot adjust the following items when Picture
Mode is set to “Vivid” or “Standard.”

Remote Commander

Control button section