Sony 60nx801 User Manual

Page of 24
19
Additi
onal
 Inform
atio
n
Additional Information
Troubleshooting
The TV will indicate any problems with the STANDBY indicator flashing in red.
When the STANDBY indicator is flashing
The self-diagnosis function is activated. 
1
Count how many times the STANDBY indicator flashes between each three second 
break.
For example, the indicator may flash three times, go off for three seconds, then flash again three 
times.
2
Press 1 (POWER) on the TV to turn it off, disconnect the AC power cord, and inform 
your dealer or Sony service center of how the indicator flashes (number of flashes).
When the STANDBY indicator is not flashing
1
Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)
2
If the problem persists, contact Sony Customer Support (information provided on the 
front cover).
Condition
Explanation/Solution
Picture
There is no picture (screen 
is dark) and no sound.
• Check the antenna/cable connection.
• Connect the TV to the AC power, and press 
1
 (POWER) on the 
TV.
• If the STANDBY indicator lights up in red, press TV 
?/1
 on the 
remote control.
Tiny black dots and/or 
bright dots appear on the 
screen.
• The screen is composed of pixels. Tiny black dots and/or bright 
dots (pixels) on the screen do not indicate a malfunction.
General
The TV’s power cannot be 
turned on.
• Check to see the (z) mark on the ENERGY SAVING SWITCH 
is pressed.
The TV turns off 
automatically (the TV 
enters standby mode).
• Check if the Sleep TimerTimer, or Idle TV Standby is 
activated.
• The Auto Shut-off function may be set to On. If Auto 
Shut-off is activated and TV receives no signal, the TV will 
automatically enter standby mode in 15 minutes. Check Auto 
Shut-off
 is activated under Eco feature of this TV.
The remote does not 
function.
• Replace the batteries.
• Your TV may be in SYNC mode. Press SYNC MENU, select TV 
Control and then select Home (Menu) or Options to control 
the TV.
The TV and its surrounding 
become warm.
• When the TV is used for an extended period of time, the TV and 
its surround may become warm to touch. This is not malfunction 
of the TV.
The Parental Lock 
password has been 
forgotten.
• Enter 4357 for the PIN code. (PIN code 4357 is always accepted.)
(Continued)