Sony 570WSPL User Manual

Chapter 1 Overview

Chapter 1

Overview

27

8

You can fit an optional CAC-12 Microphone Holder
here.  (See page 43.)

9

A video light with a maximum power consumption of
30 W such as the Anton Bauer Ultralight 2 or
equivalent can be connected.

0

If you use a lens with cable, connect the lens cable.

qa

This outputs the video signal captured by the
camcorder.

qs

Connect the optional RM-M7G Remote Control Unit
to this connector. Set the CAMERA SELECT switch
on the bottom of RM-M7G to 1.

• EZ mode cannot be used if the RM-M7G is

connected to the camcorder.

• Be sure to turn off the power of the camcorder before

connecting the RM-M7G.

• Be sure to turn off the power of the camcorder before

disconnecting the equipment connected to this
connector. Otherwise, the camcorder will not work
properly.

• To control this unit from a CCU (camera control

unit), connect the RM-M7G to the CCU.

1

Power the camcorder and press the EJECT button to
open the lid. Insert the cassette and close the lid by
pressing the indication “PUSH” .

2

1

2

3

4

5

6

7

GEN LOCK IN: When synchronizing the camcorder

to an external signal, input a reference video
signal (VBS or BS). (See page 93.)

VIDEO IN: When the optional DSBK-501/501P

Analog Composite Input Board is fitted to the
camcorder, you can input the analog video signals
(VBS) to this connector.

a) When the optional DSBK-501/501P is fitted