Sony ad-cwrf35 User Manual

EN

11

When sound distortion due to noise occurs,
change the current position of the FREQUENCY
SELECT switch to the other position (88.7 or
89.1 MHz) using a screwdriver or similar tool,
which may eliminate the noise. The selection of
the appropriate frequency must be done before
securing the power unit & FM modulator in
position.

The radio sensitivity may be slightly reduced when the
power unit & FM modulator is connected.  In this case,
turn off the compact disc changer.

The LEVEL control on the power unit & FM
modulator is set to the center position, an average
level commonly used, at the factory.  If necessary,
adjust the level according to following these
steps before securing the power unit & FM
modulator in position.

On your car stereo, select one of FM programs
available and adjust a sound volume  to the
level of your preference. This volume will be
used as a reference to adjust CD sound
volume in step 4.

Select a frequency 88.7 or 89.1 MHz according
to the selection on the FREQUENCY SELECT
switch of the power unit & FM modulator.

Play a CD placed in the compact disc changer.

Adjust the sound volume with the CD playing
so as to match the volume adjusted in step 1.

Setting this control to maximum or to an excessively
high level will cause sound distortion.

FREQUENCY SELECT
switch

LEVEL control