Sony bluetooth bt3700u User Manual

Page of 180
31
E:\#Data Disc\1006_Saishin\4125655411\412565541MEXBT3700U\01GB02CD-
EUR.fm
masterpage:Right
MEX-BT3700U
4-125-655-41 (1)
Error displays/Messages
If these solutions do not help improve the situation, 
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD 
playback trouble, bring the disc that was used at the 
time the problem began.
The connected Bluetooth audio device cannot 
be controlled.
Check that the connected Bluetooth audio device 
supports AVRCP.
Some functions do not work.
Check if the connecting device supports the functions 
in question.
A call is answered unintentionally.
The connecting phone is set to answer a call 
automatically.
No sound is output from the car speakers 
during handsfree call.
If the sound is output from the cellular phone, set the 
cellular phone to output the sound from the car 
speakers.
“OFF BT” appears when initializing.
Press and hold (BT) until “
” turns off. Then 
initialize again (page 21).
The external microphone does not work.
The setting of the microphone is not correct.
t Set “EXT” (page 22).
CHECKING
The unit is confirming the connection of a USB device.
t Wait until confirming the connection is finished.
ERROR*
1
• The disc is dirty or inserted upside down.*
2
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
• USB device was not automatically recognized.
t Reconnect it again.
• Press Z to remove the disc.
FAILURE
The connection of speakers/amplifiers is incorrect.
t See the installation/connections manual of this 
model to check the connection.
HUB NO SUPRT
USB hub is not supported on this unit.
LOAD
The CD changer is loading the disc.
t Wait until loading is complete.
L. SEEK +/–
The local seek mode is on during automatic tuning.
NO AF
There is no alternative frequency for the current 
station.
t Press (SEEK) +/– while the program service name 
is flashing. The unit starts searching for another 
frequency with the same PI (Program 
Identification) data (“PI SEEK” appears).
NO DEV (No Device)
(SOURCE) is selected without a USB device 
connected. A USB device or a USB cable has been 
disconnected during playback.
t Be sure to connect a USB device and USB cable.
NO DISC
The disc is not inserted in the CD changer.
t Insert discs in the CD changer.
NO MAG
The disc magazine is not inserted in the CD changer.
t Insert the disc magazine in the CD changer.
NO MUSIC
The disc or USB device does not contain a music file.
t Insert a music CD in this unit or an MP3 playable 
CD changer.
t Connect a USB device with a music file in it.
NO NAME
A disc/album/artist/track name is not written in the 
track.
NO TP
The unit will continue searching for available TP 
stations.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error indication 
remains on in the display, consult your nearest 
Sony dealer.
OVERLOAD
USB device is overloaded.
t Disconnect the USB device, then change the source 
by pressing (SOURCE).
t Indicates that the USB device is out of order, or an 
unsupported device is connected.
READ
The unit is reading all track and album information on 
the disc.
t Wait until reading is complete and playback starts 
automatically. Depending on the disc structure, it 
may take more than a minute.
RESET
The CD unit, CD changer or USB device cannot be 
operated due to a problem.
t Press the RESET button (page 6).
USB NO SUPRT (USB Not Support)
The connected USB device is not supported.
t For details on the compatibility of your USB 
device, visit the support site.
”  or  “
During reverse or fast-forward, you have reached the 
beginning or the end of the disc and you cannot go any 
further.
The character cannot be displayed with the unit.
*1 If an error occurs during playback of a CD, the disc 
number of the CD does not appear in the display.
*2 The disc number of the disc causing the error 
appears in the display.