Sony bdp-s380 User Manual
23
Additional Information
Playback does not start from the resume
point where you last stopped playing.
point where you last stopped playing.
, The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
The disc tray does not open and
“LOCKED” or “TLK ON” appears on the
front panel display.
“LOCKED” or “TLK ON” appears on the
front panel display.
, When “LOCKED” appears, the player is
locked. To cancel the Child Lock, hold
down N on the player until “UNLOCK”
appears on the front panel display (page 7).
down N on the player until “UNLOCK”
appears on the front panel display (page 7).
, When “TLK ON” appears, contact your
Sony dealer or local authorized Sony
service facility.
service facility.
The disc tray does not open and you
cannot remove the disc even after you
press Z.
cannot remove the disc even after you
press Z.
, Try the following:
1
Turn the player off,
and disconnect the AC power cord.
2
Reconnect the AC power cord while
pressing down Z on the player.
3
Keep
pressing down Z on the player until the tray
opens.
opens.
4
Remove the disc.
5
When
“OPEN” appears on the front panel display,
hold down [/1 on the player for more than
10 seconds until the player turns off.
hold down [/1 on the player for more than
10 seconds until the player turns off.
“Exxxx” or “TEM ERR” appears on the
front panel display.
front panel display.
, When “Exxxx” appears, contact your
nearest Sony dealer or local authorized
Sony service facility and give the error
code.
Sony service facility and give the error
code.
, When “TEM ERR” appears, place the
player in a location with adequate
ventilation to prevent heat build-up in the
player.
ventilation to prevent heat build-up in the
player.
The player does not respond to any button.
, Moisture has condensed inside the player
, Hold down [/1 on the player for more than
10 seconds until the indicators on the front
panel display turn off.
If the player still does not respond to any
button, disconnect then reconnect the AC
power cord.
panel display turn off.
If the player still does not respond to any
button, disconnect then reconnect the AC
power cord.
Specifications
System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load impedance)
LINE OUT R-AUDIO-L:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
COMPONENT VIDEO OUT (Y, P
B
, P
R
):
Phono jack/Y: 1.0 Vp-p/
P
P
B
, P
R
: 0.7 Vp-p/75 ohms
LINE OUT VIDEO:
Phono jack/1.0 Vp-p/75 ohms
LAN (100):
100BASE-TX Terminal
USB:
USB jack Type A (For connecting a USB
memory, memory card reader, digital still
camera, and digital video camera)
memory, memory card reader, digital still
camera, and digital video camera)
General
Power requirements:
U.S. and Canada models:
120V AC, 60Hz
Models for other areas:
110-240V AC, 50/60Hz
See page 3 for further information.
120V AC, 60Hz
Models for other areas:
110-240V AC, 50/60Hz
See page 3 for further information.
Power consumption:
18 W
Dimensions (approx.):
430 mm × 199 mm × 36 mm
(17 in. × 7
(17 in. × 7
4
/
5
in. × 1
7
/
16
in.)
(width/depth/height) incl. projecting parts
Mass (approx.):
1.6 kg (3 lb 9 oz)
Operating temperature:
5 ºC to 35 ºC (41 °F to 95 °F)
Operating humidity:
25 % to 80 %
Supplied accessories
• Audio/video cable (phono plug ×3) (1)
• HDMI cable (1) (BDP-BX38 only)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
A plug adaptor is included with some models.
• HDMI cable (1) (BDP-BX38 only)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
A plug adaptor is included with some models.
Specifications and design are subject to
change without notice.
change without notice.
,continued