Sony bdp-s270 User Manual

Page of 35
4
• Do not use solvents such as 
benzine, thinner, 
commercially available disc/
lens cleaners, or anti-static 
spray intended for vinyl LPs.
• If you have printed the disc’s 
label, dry the label before 
playing.
• Do not use the following discs.
– A lens cleaning disc.
– A disc that has a non-
standard shape (e.g., card, 
heart).
– A disc with a label or sticker 
on it.
– A disc that has cellophane 
tape or sticker adhesive on it.
• Do not resurface the playing 
side of a disc to remove 
surface scratches.
Precautions
On placement
• Place the player in a location 
with adequate ventilation to 
prevent heat build-up in the 
player.
• Do not place the player on a 
soft surface such as a rug that 
might block the ventilation 
holes.
• Do not install this player in a 
confined space, such as a 
bookshelf or similar unit.
• Do not place the player in a 
location near heat sources, or 
in a place subject to direct 
sunlight, excessive dust, or 
mechanical shock.
• Do not place the player 
outdoors, in vehicles, on ships, 
or on other vessels.
• If the player is brought directly 
from a cold to a warm location, 
or is placed in a very damp 
room, moisture may condense 
on the lenses inside the player. 
Should this occur, the player 
may not operate properly. In 
this case, remove the disc and 
leave the player turned on for 
about half an hour until the 
moisture evaporates.
• Do not install the player in an 
inclined position. It is 
designed to be operated in a 
horizontal position only.
• Do not place heavy or unstable 
objects on the player.
• Do not place any objects other 
than discs on the disc tray. 
Doing so may cause damage to 
the player or the object.
• Take out any discs when you 
move the player. If you don’t, 
the disc may be damaged.
• Disconnect the AC power cord 
and all other cables from the 
player when you move the 
player.
On power sources
• The player is not disconnected 
from the AC power source as 
long as it is connected to the 
wall outlet, even if the player 
itself has been turned off.
• Disconnect the player from the 
wall outlet if you are not going 
to use the player for a long 
time. To disconnect the AC 
power cord, grasp the plug 
itself; never pull the cord.
• Observe following points to 
prevent the AC power cord 
being damaged. Do not use the 
AC power cord if it is 
damaged, as doing so may 
result in an electric shock or 
fire.
– Do not pinch the AC power 
cord between the player and 
wall, shelf, etc.
– Do not put anything heavy 
on the AC power cord or pull 
on the AC power cord itself.
On adjusting volume
Do not turn up the volume while 
listening to a section with very 
low level inputs or no audio 
signals. If you do, your ears and 
the speakers may be damaged 
when a peak level section is 
played.