Sony bdp-s185-bx18 User Manual
20
The disc does not play.
, The disc is dirty or skewed.
, The disc is upside down. Insert the disc with
, The disc is upside down. Insert the disc with
the playback side facing down.
, The disc has a format that cannot be played
back by this player (page 22).
, The player cannot play a recorded disc that
is not correctly finalized.
, The region code on the BD or DVD does
not match the player.
The player does not detect a USB device
connected to the player.
connected to the player.
, Make sure that the USB device is securely
connected to the USB jack.
, Check if the USB device or a cable is
damaged.
, Check if the USB device is on.
, If the USB device is connected via a USB
, If the USB device is connected via a USB
hub, connect the USB device directly to the
player.
player.
The picture/sound is poor/certain
programs display a loss of detail,
especially during fast-motion or dark
scenes.
programs display a loss of detail,
especially during fast-motion or dark
scenes.
, Picture/sound quality may be poor
depending on Internet content providers.
, Picture/sound quality may be improved by
changing the connection speed.
Recommended connection speed is of at
least 2.5 Mbps for standard definition video
(10 Mbps for high definition video).
Recommended connection speed is of at
least 2.5 Mbps for standard definition video
(10 Mbps for high definition video).
, Not all videos will contain sound.
The picture is small.
, Press M to zoom in.
The player cannot connect to the network.
, Check the network connection (page 11)
and the network settings (page 18).
The message [A new software version is
available. Please go to the “Setup”
section of the menu and select “Network
update” to perform the update.] appears
on the screen when turning the player on.
available. Please go to the “Setup”
section of the menu and select “Network
update” to perform the update.] appears
on the screen when turning the player on.
, See [Network Update] (page 15) to update
the player to a newer software version.
The [Control for HDMI] function does not
work (BRAVIA Sync).
work (BRAVIA Sync).
, Check that [Control for HDMI] is set to
[On] (page 18).
, If you change the HDMI connection, turn
the player off and on again.
, If power failure occurs, set [Control for
HDMI] to [Off], then set [Control for
HDMI] to [On] (page 18).
HDMI] to [On] (page 18).
, Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is compatible
component.
– the connected component is compatible
with the [Control for HDMI] function.
– the connected component’s setting for
the [Control for HDMI] function is
correct.
correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
– if the AV amplifier (receiver) is not
compatible with the [Control for HDMI]
function, you may be unable to control
the TV from the player.
function, you may be unable to control
the TV from the player.
– if you change the HDMI connection,
disconnect and reconnect the AC power
cord, or a power failure occurs, try the
following:
cord, or a power failure occurs, try the
following:
1
Switch the input selector of
the AV amplifier (receiver) so that the
picture from the player appears on the
TV screen.
picture from the player appears on the
TV screen.
2
Set [Control for HDMI] to
[Off], then set [Control for HDMI] to
[On] (page 18). Refer to the instruction
manual supplied with the AV amplifier
(receiver).
[On] (page 18). Refer to the instruction
manual supplied with the AV amplifier
(receiver).
Disc
USB device
Sony Entertainment Network
Network connection
Control for HDMI (BRAVIA Sync)