Sony 4418506211 User Manual

Page of 52
18
Step 2: Preparing for 
Network Connection
Use a LAN cable to connect to the LAN 
(100) terminal on the player.
z
Using a shielded interface cable (LAN cable) 
is recommended.
Use the wireless LAN that is built into 
the player.
z
Use a wireless LAN router supporting 
802.11b/g or 802.11b/g/n.
Before setting the network settings
When your wireless LAN router (access 
point) is Wi-Fi Protected Setup (WPS)-
compatible, you can easily set the 
network settings with the WPS button.
If not, check the following information 
in advance, and record it in the space 
provided below.
– The network name (SSID*
1
) that 
identifies your network*
2
.
SSID*
1
:
– If security is set on your wireless 
network, the security key (WEP key, 
WPA key)*
2
.
Security key:
*1
SSID (Service Set Identifier) is a name that 
identifies a particular wireless network.
*2
You need to check the setting of your 
wireless LAN router for information about 
the SSID and security key. 
For details:
– visit the following website:
http://www.sony.com/bluraysupport/
– refer to the instruction manual supplied 
with the wireless LAN router
– consult the manufacturer of the wireless 
LAN router.
Wired Setup
Wireless Setup
LAN cable
(not supplied)
Broadband 
router
ADSL modem/
Cable modem
Internet
Wireless 
LAN router
ADSL modem/
Cable modem
Internet
LAN cable
(not supplied)