Sony BDV-E880 User Manual

Page of 80
50
US
• You can change measurement units (feet or meters) 
by pressing the color button (RED).
[Level]
You can adjust the sound level of the speakers. 
You can set the parameters from –6.0 dB to +6.0 
dB. Be sure to set [Test Tone] to [On] for easy 
adjustment.
[Front Left/Right] 0.0 dB: Set the front speaker 
level.
[Center]* 0.0 dB: Set the center speaker level.
[Surround Left/Right]
*
 0.0 dB: Set the surround 
speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer level.
* This item appears when you set it to [Yes] in the 
[Connection] setting.
[Test Tone]
The speakers will emit a test tone to adjust 
[Level].
[Off]: The test tone is not emitted from the 
speakers.
[On]: The test tone is emitted from each speaker 
in sequence while adjusting level. When you 
select one of the [Speaker Settings] items, the 
test tone is emitted from each speaker in 
sequence.
Adjust the sound level as follows.
1
Set [Test Tone] to [On].
2
Press 
X/x to select [Level], then press 
.
3
Press 
X/x to select the desired speaker 
type, then press 
.
4
Press 
C/c to select the left or right 
speaker, then press 
X/x to adjust the 
level.
5
Press .
6
Repeat Steps 3 to 5.
7
Press RETURN.
The system returns to the previous display.
8
Press 
X/x to select [Test Tone], then 
press .
9
Press 
X/x to select [Off], then press 
.
• The test tone signals are not output from the HDMI 
(OUT) jack.
• To adjust the volume of all the speakers at one time, 
press VOL +/–.
Using the Sleep Timer
You can set the system to turn off at a preset 
time, so you can fall asleep listening to music. 
The time can be preset in intervals of 10 
minutes.
Press SLEEP.
Each time you press SLEEP, the minutes display 
(the remaining time) in the front panel display 
changes by 10 minutes.
When you set the sleep timer, the remaining 
time appears every 5 minutes.
When the remaining time is less than 2 minutes, 
“SLEEP” flashes in the front panel display.
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired 
time.