Sony BDVN8100W User Manual

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 
01)\4456334121_US (U)\080OTH.fm

masterpage: Left

x [Relocation]
You can correct the speaker position 
virtually to improve the surround effect.

[On]: You can hear sound from a virtually 
relocated speaker position determined by 
[Auto Calibration].
[Off]: You can hear sound from the actual 
speaker position.

• This setting is only reflected after performing 

[Auto Calibration].

• You cannot select this function when the 

speaker layout is set to [All Front].

x [Test Tone]
The speakers will emit a test tone to adjust 
[Level].

[Off]: The test tone is not emitted from the 
speakers.
[On]: The test tone is emitted from each 
speaker in sequence while adjusting level. 
When you select one of the [Speaker 
Settings] items, the test tone is emitted 
from each speaker in sequence.
Adjust the sound level as follows.

Set [Test Tone] to [On].

Press 

V/v to select [Level], then 

press .

Press 

V/v to select the speaker type 

you want, then press 

.

Press 

B/b to select the left or right 

speaker, then press 

V/v to adjust the 

level.

Press .

Repeat Steps 3 to 5.

Press RETURN.

The system returns to the previous 
display.

Press 

V/v to select [Test Tone], then 

press .

Press 

V/v to select [Off], then press 

.

The test tone signals are not output from the 
HDMI (OUT) jack.

To adjust the volume of all the speakers at one 
time, press VOL +/–.

You can set the system to turn off at a 
preset time, so you can fall asleep listening 
to music. The time can be preset in intervals 
of 10 minutes.

Each time you press SLEEP, the minutes 
display (the remaining time) in the top 
panel display changes by 10 minutes.

When you set the sleep timer, the 
remaining time appears every 5 minutes.
When the remaining time is less than 
2 minutes, “SLEEP” flashes in the top 
panel display.

Press SLEEP once.

Press SLEEP repeatedly.