Sony BDVN8100W User Manual

Page of 88
64
US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 
01)\4456334121_US (U)\090SET.fm
masterpage: Left
[Music Settings]
[Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio 
CD layer.
[CD]: Plays the CD layer.
[Super Audio CD Playback 
Channel]
[DSD 2ch]: Plays the 2-channel area.
[DSD Multi]: Plays the multi-channel area.
[System Settings]
[OSD Language]
You can select the language you want for 
the system on-screen display.
[Wireless Sound Connection]
You can make further settings for the 
wireless system. For details, see “Further 
Settings for the Wireless System” 
(page 57)
.
You can also check the wireless 
transmission status. When wireless 
transmission is activated, [OK] appears to 
the right of [Status].
[Main Unit illumination]
[On]: The top panel display always is 
turned on, soft-touch buttons indicator are 
always lit and the brightness of the LED 
indicator is the maximum.
[Auto]: The top panel display and soft-
touch buttons indicator are turned off and 
the brightness of LED indicator is reduced 
automatically if you do not operate the 
system for about 10 seconds.
When [Auto] is selected, only N button lights up 
during playback.
[HDMI Settings]
[Control for HDMI]
[On]: Turns on the [Control for HDMI] 
function. You can operate mutually 
between equipment that are connected with 
an HDMI cable.
[Off]: Off.
[Audio Return Channel]
This function is available when you 
connect the system to a TV’s HDMI IN 
jack that is compatible with the Audio 
Return Channel function and [Control for 
HDMI] is set to [On].
[Auto]: The system can receive the digital 
audio signal of the TV automatically via an 
HDMI cable.
[Off]: Off.
[Quick Start Mode]
[On]: Shortens the startup time from 
standby mode. You can operate the system 
quickly after turning it on.
[Off]: The default setting.
[Power Save Drive]
[On]: Reduces power consumption when 
volume level is low.
[Off]: Normal status. The system can 
output sound volume.
[Auto Display]
[On]: Automatically displays information 
on the screen when changing the viewing 
titles, picture modes, audio signals, etc.
[Off]: Displays information only when you 
press DISPLAY.
Note