Sony BDVN8100W User Manual

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF 
01)\4456334121_US (U)\100ADD.fm

masterpage: Right

• Should any solid object or liquid fall into 

the cabinet, unplug the system and have it 
checked by qualified personnel before 
operating it any further.

• Do not touch the AC power cord (mains 

lead) with wet hands. Doing so may cause 
an electric shock.

If you are not going to use the system for a 
long time, be sure to disconnect the system 
from the wall outlet. To disconnect the AC 
power cord (mains lead), grasp the plug 
itself; never pull the cord.

• Place the system in a location with 

adequate ventilation to prevent heat 
build-up in the system.

• Although the system heats up during 

operation, this is not a malfunction. If you 
continuously use this system at a large 
volume, the cabinet temperature of the 
top, side and bottom rises considerably. 
To avoid burning yourself, do not touch 
the cabinet.

• Do not place the system on a soft surface 

(rugs, blankets, etc.) that might block the 
ventilation holes.

• Do not install the system near heat 

sources such as radiators, air ducts, or in 
a place subject to direct sunlight, 
excessive dust, mechanical vibration, or 
shock.

• Do not install the system in an inclined 

position. It is designed to be operated in a 
horizontal position only.

• Keep the system and discs away from 

components with strong magnets, such as 
microwave ovens, or large loudspeakers.

• Do not place heavy objects on the system.
• Do not place metal objects in front of the 

front panel. It may limit reception of 
radio waves.

• Do not place the system in a place where 

medical equipment is in use. It may cause 
a malfunction of medical equipment.

• If you use a pacemaker or other medical 

device, consult your physician or the 
manufacturer of your medical device 
before using the wireless LAN function.

If the system is brought directly from a cold 
to a warm location, or is placed in a very 
damp room, moisture may condense on the 
lenses inside the main unit. Should this 
occur, the system may not operate properly. 
In this case, remove the disc and leave the 
system turned on for about half an hour 
until the moisture evaporates.

Do not turn up the volume while listening 
to a section with very low level inputs or no 
audio signals. If you do, the speakers may 
be damaged when a peak level section is 
suddenly played.

Clean the cabinet, panel, and controls with 
a soft cloth slightly moistened with a mild 
detergent solution. Do not use any type of 
abrasive pad, scouring powder or solvent 
such as alcohol or benzine.