Sony bravia kdl-32xbr4 User Manual

F:\Worker\SONY WAX3 D-series EN 
121\3212313121(052907)\060USE.fm

KDL-32XBR4/KDL-40D3000

MTS 
Enjoy stereo, bilingual 
and mono programs

For stereo reception when viewing a TV program broadcast in stereo. 

Automatically switches the TV to second audio programs when a SAP 
signal is received. If no SAP signal is present, the TV remains in 
Stereo mode.

For mono reception. Use to reduce noise during weak stereo 
broadcasts.

~

• MTS is available only for analog programs.

Select to use the TV speakers for audio.

Select this option if you wish to use an external audio system for the 
TV sound. By selecting this option you are disabling the TV speakers.

Audio Out
Easy control of volume 
adjustment

Select to fix the audio output and allow you to adjust the volume with 
your audio system’s remote control. (The TV’s remote control’s 
VOLUME and MUTING buttons have no effect on the Audio Out.)

Select to control the Audio Out’s volume and muting with your TV’s 
remote control.

~

• Alternate Audio feature is available only for digital programs. If the program you are watching is also available in 

other languages from the audio tracks, and if that language is what you have selected in the Language setting, your 
TV will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio 
option may be accessed by pressing the OPTIONS button on the remote control when alternate audio stream is 
available from the broadcaster.

For receiving cable channels via cable TV provider.

For using an antenna.

~

• You should run Auto Program after changing the Cable setting.

Automatically sets up the channel list on the TV for all receivable channels. Channel 
scanning will be based on the Cable On/Off setting.

Select Auto Program.

Select OK to start Auto Program. When Auto Program is completed, the screen 
will display the number of channels found.

Press RETURN to exit the Auto Program.

~

• Running Auto Program will clear Favorites list.
• If you run Auto Program again, previously scanned channels will be overwritten with 

the newly scanned channels.

Select to add digital channels. Be sure to have the Cable option selected appropriately for 
the signal source. (Useful for antenna installations.)