Sony bdv-ef200 User Manual
42
GB
4
Press
X/x to select [Save & Connect],
then press
.
The system starts checking the network
connection.
connection.
5
Check that the message [Internet
Settings is now complete.] appears,
then press
Settings is now complete.] appears,
then press
.
The setup is finished. If the message does
not appear, follow the on-screen messages.
not appear, follow the on-screen messages.
Manual setting
1
Press
X/x to select [Wired Setup] on
the [Internet Settings] display, then
press .
press .
2
Press
X/x to select [Custom], then
press .
3
Press
X/x to select the network setting
type, then press
.
• [Auto]: The system sets the IP address
automatically, and the [DNS Settings]
display appears.
When you select [Auto] and press
display appears.
When you select [Auto] and press
, the
system sets the DNS setting
automatically.
When you select [Specify IP address] and
press
automatically.
When you select [Specify IP address] and
press
, enter the DNS settings
manually.
Press
Press
C/X/x/c and the number buttons to
set the following items, then press
.
– [Primary DNS]
– [Secondary DNS]
• [Specify IP address]: Enter the network
settings manually according to your
network environment.
Press
network environment.
Press
C/X/x/c and the number buttons to
set the following items, then press
.
– [IP Address]
– [Subnet Mask]
– [Default Gateway]
– [Primary DNS]
– [Secondary DNS]
4
Press
X/x to select the proxy server
setting, then press
.
• [No]: A proxy server is not used.
• [Yes]: Enter the proxy server setting.
• [Yes]: Enter the proxy server setting.
Press
C/X/x/c and the number buttons,
then press
.
The value of the internet settings appears on
the TV screen.
the TV screen.
5
Press
c.
6
Press
X/x to select [Save & Connect],
then press
.
The system starts checking the network
connection.
connection.
7
Check that the message [Internet
Settings is now complete.] appears,
then press
Settings is now complete.] appears,
then press
.
The setup is finished. If the message does
not appear, follow the on-screen messages.
not appear, follow the on-screen messages.
Follow the Steps below for connecting to a
wireless LAN (Local Area Network).
wireless LAN (Local Area Network).
When your wireless router is
compatible with the WPS
function
compatible with the WPS
function
1
Press
X/x to select [USB Wireless
Setup] on the [Internet Settings]
display, then press
display, then press
.
2
Press
X/x to select [Wi-Fi Protected
Setup (WPS)], then press
.
3
Activate the WPS function of your
wireless router, press
wireless router, press
X/x to select
[Start], then press
.
For details about activating the WPS
function, see the operating instructions of
your router.
function, see the operating instructions of
your router.
When connecting to the
wireless LAN with the USB
Wireless LAN Adapter
wireless LAN with the USB
Wireless LAN Adapter