Sony BKP-7933 User Manual

1-17 (E)

BKP-7933

1.

Select the menu item “Z:BKP-7933 CONFIGURA-
TION” and press [ENTER].

SONY ROUTING SYSTEM SETUP MENU         BKP-7933 V1.00      STATION NUMBER 2

   

                         MODIFICATION COMMAND

 A: SET UNIT LOCATION(CAM-CCU)          B: SET UNIT LOCATION(CCU-RCP)

 C: SET UNIT LOCATION(MSU)

 K: RESET TO DEFAULT TABLE

                         MAINTENANCE COMMAND

 Z: BKP-7933 CONFIGURATION

 Ctrl-D RETURN

BKP-7933 CONFIGURATION                 BKP-7933 V1.00      STATION NUMBER 2

                         S-BUS CONFIGURATION

         A: ROUTER PIX1 ASSIGN         B: ROUTER WF1 ASSIGN

         C: ROUTER PIX2 ASSIGN         D: ROUTER WF2 ASSIGN

         E: ROUTER PIX3 ASSIGN         F: ROUTER WF3 ASSIGN

         G: S-BUS TALLY                H: BKP-7933  MODE

                                                   Ctrl-E RETURN TO MENU

BKP-7933 CONFIGURATION              BKP-7933  V1.00     STATION NUMBER 2

ROUTER PIX2 ASSIGN (For MSUs Camera Select)

CNU GROUP No        SOURCE No     DESTINATION No        LEVEL No

 (Camera No.)

    0  ( 1)            0001        0013 [FOR MSU  1]     1---

    0  ( 2)            0002        0014 [FOR MSU  2]         

    0  ( 3)            0003        0000 [FOR MSU  3]         

    0  ( 4)            0004        0000 [FOR MSU  4] 

        

    0  ( 5)            0005        0000 [FOR MSU  5]        

    0  ( 6)            0006        0000 [FOR MSU  6]       

                                   0000 [FOR MSU  7]    

    1  ( 7)            0007        0000 [FOR MSU  8]      

    1  ( 8)            0008        0000 [FOR MSU  9]

    1  ( 9)            0009        0000 [FOR MSU 10]

    1  (10)            0010        0000 [FOR MSU 11]

    1  (11)            0011        0000 [FOR MSU 12]

    1  (12)            0012        0000 [FOR MSU 13]

                                   0000 [FOR MSU 14]

                                   0000 [FOR MSU 15]

                                   0000 [FOR MSU 16]

     F1:F2:   F3:PgUp  F4:PgDn                     Ctrl-E RETURN TO MENU

2.

Select either “C:ROUTER PIX2 ASSIGN” or

“D:ROUTER WF2 ASSIGN” using the cursor key and
press [ENTER]. (The illustration shows the display
that selects “C:ROUTER PIX2 ASSIGN”. )

3.

Move the cursor key to the desired position to be

changed and press [ENTER]. (The display enters the

input mode.)

4.

 Input the SOURCE No., DESTINATION No. and

LEVEL No. using the numeric keys and press
[ENTER]. (The illustration shows the display that
selects “C:ROUTER PIX2 ASSIGN”. )

m
. Any number in the range of 1 to 1024 can be

selected and set to the SOURCE No. and DESTINA-

TION No. without being consecutive.

. LEVEL No. can be freely set, but it cannot be set for

each camera number.

1-7. Setting Up